Rob21 Posted February 28, 2018 Share Posted February 28, 2018 Taken ideas from the slabbie thread. Full Yoshi Cyclone with Ti Blue end can. 1 Quote Link to comment
no class Posted February 28, 2018 Share Posted February 28, 2018 People pay for the discoloration on thier pipes ,that can be achieved by a 3 minute wot burnout ...... fashionista 2 Quote Link to comment
Nick Posted February 28, 2018 Share Posted February 28, 2018 Standard full akra... still the best system about that isnt unobtanium, I think?! 1 Quote Link to comment
markfoggy Posted February 28, 2018 Share Posted February 28, 2018 4 hours ago, no class said: People pay for the discoloration on thier pipes ,that can be achieved by a 3 minute wot burnout ...... fashionista But, but.... It costs Yoshi 2 tyres to do that, doesn't it? Quote Link to comment
Rob21 Posted February 28, 2018 Author Share Posted February 28, 2018 Think it was another 30 quid lol Quote Link to comment
no class Posted February 28, 2018 Share Posted February 28, 2018 Track scrubs from where I come from were cheap ..... Quote Link to comment
bluedog59 Posted February 28, 2018 Share Posted February 28, 2018 2 hours ago, Nick said: Standard full akra... still the best system about that isnt unobtanium, I think?! They're the "Go to" company for most teams in MotoGP, no matter what sponsors stickers the team are running. 1 Quote Link to comment
Kurf Posted March 1, 2018 Share Posted March 1, 2018 Unknown ( Sebring?) stainless headers, homemade collector with yoshimura can. 2 Quote Link to comment
Oilyspanner Posted March 1, 2018 Share Posted March 1, 2018 Swapped the original system for a Muller system (remember them) - worked well, bike was transformed from lumbering fairly quite thing, into a lighter, properly rapid bike Then bought a used Akrapovic system . Initially fitted a Quill silencer, nice looking but being round was close to the swingarm. So I bought an oval Akra can - job done ... 2 Quote Link to comment
El Gringo Posted March 1, 2018 Share Posted March 1, 2018 Ooooh i can play this one now Akrapovic 4-2-1 from a Bandit 12, home made link pipe and a jauntily angled Akra Titanium can from an SRAD 3 Quote Link to comment
Oilyspanner Posted March 1, 2018 Share Posted March 1, 2018 Slingies rock too ! As much as I like Slabbies I don't like the riding position and with a bit of work they can be very good - as with all the O/C bikes, the world's the limit on mods. I meant to write 'fairly quick', not 'fairly quite' in my previous post - being a careless knoblet there ! Quote Link to comment
Captain Chaos Posted March 4, 2018 Share Posted March 4, 2018 bought this Termignoni 4-2-1 new in 2001 I think. Very light, good quality, good sound, looks nice IMO. Only downside was limited ground clearance. Still got the bike nowadays, sold the pipe some 5 years ago. 3 Quote Link to comment
george 1100 Posted March 5, 2018 Share Posted March 5, 2018 Mine, ZX10 mated to GSXR1000 2 Quote Link to comment
wildebeest90210 Posted March 13, 2018 Share Posted March 13, 2018 (edited) Now that's a limited ground clearance! (slingshot motor) Edited March 13, 2018 by wildebeest90210 2 Quote Link to comment
wildebeest90210 Posted March 13, 2018 Share Posted March 13, 2018 24 minutes ago, vizman said: pffft pffffffffffft? Quote Link to comment
CockneyRick Posted March 14, 2018 Share Posted March 14, 2018 Too many "Rocket Launcher" cans here. Less is more and D&D were (are) always my favourite cans by far! 2 Quote Link to comment
Sandman Posted March 14, 2018 Share Posted March 14, 2018 Yoshimura and Acrapovic on two 7/11 + Yoshimura tuned snowblower With RS-3 full exhaust :-) Quote Link to comment
Mole28 Posted March 15, 2018 Share Posted March 15, 2018 Old race pipe that I've cleaned up ,wrapped and stuck a Black Widow can on. 1 Quote Link to comment
AndyLoader Posted April 24, 2018 Share Posted April 24, 2018 Full Devil pipe. Deep sound and smooth curve on the dyno with no dips anywhere. 1 Quote Link to comment
IceKat Posted May 14, 2018 Share Posted May 14, 2018 (edited) A bit of an oddity this, Mach Hokusuya 4-2-1 Edited May 15, 2018 by IceKat Quote Link to comment
StrokerBoy Posted May 15, 2018 Share Posted May 15, 2018 Japanese Techserfu carbon/kevlar pipe on my RK, sounds ace, weighs nowt. 3 Quote Link to comment
matt Posted May 17, 2018 Share Posted May 17, 2018 Akra headers and link pipe with a Scorpion end can on the 7/11. After 10 years I have just given them the Harpic treatment and they came up surprising well Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.