eightball_hotrod Posted March 9, 2018 Posted March 9, 2018 http://www.lucky7moto.com/blog/?page_id=415 Quote
KATANAMANGLER Posted March 9, 2018 Posted March 9, 2018 4 hours ago, scott-s said: Old post...but who is this Lucky 7? I'd love to find some prefabbed shock mounts. Go to the Traders section, the articles section or the front page. He's now an OSS trader offering discounts. http://oldskoolsuzuki.info/archives/2007 1 Quote
Paulm Posted March 9, 2018 Posted March 9, 2018 7 hours ago, scott-s said: Old post...but who is this Lucky 7? I'd love to find some prefabbed shock mounts. I’m sure Grumpy1260 do shockmounts as well, and Lucky7 are in our traders section in marketplace. Quote
Blubber Posted March 9, 2018 Posted March 9, 2018 9 hours ago, scott-s said: Old post...but who is this Lucky 7? I'd love to find some prefabbed shock mounts. i can answer that one, see this topic : Quote
vizman Posted March 9, 2018 Posted March 9, 2018 why use googlies when you could just message him.... Quote
scott-s Posted March 9, 2018 Posted March 9, 2018 Thanks, all. I wasn't aware he was a trader here and when I googled it I got a go kart company. Probably because I'm in the US. Quote
Hutch Posted March 9, 2018 Posted March 9, 2018 The link to their site is http://www.lucky7moto.com/blog/ but you cant buy on there, Best bet is their facebook page. https://www.facebook.com/luckyseven.motorcycles/ Quote
vizman Posted March 9, 2018 Posted March 9, 2018 well i'd have hoped the best place is on here......otherwise what's the f'king point of having a traders section 7 Quote
Swiss Toni Posted March 10, 2018 Posted March 10, 2018 18 hours ago, vizman said: why use googlies when you could just message him.... Doh! Didn't realise he was a trader, Viz. Now much easier to find him! 1 Quote
vizman Posted March 10, 2018 Posted March 10, 2018 14 minutes ago, Swiss Toni said: Doh! Didn't realise he was a trader, Viz. Now much easier to find him! have you entered the lucky7moto competition ? Quote
banoffee Posted March 10, 2018 Posted March 10, 2018 If you contact them on here you get a discount. If you don’t, you don’t. Your choice really. PM@Jay_111for the discount as per the traders article. Quote
Hutch Posted March 12, 2018 Posted March 12, 2018 Sorry for putting up those links but as a newbie i cant see the traders section. Sorry for balls up Quote
TrunKz Posted June 20, 2018 Posted June 20, 2018 Hey I still have no exact information if I can mount a GSXR 1100 or Bandit 1200 swingarm in my 85er EF frame. I do not know how to solve this with the redirection. The Suspenstion system from the EF is very different. It's important that my 5.5x17 wheel fits the 180 Tire. Quote
Swiss Toni Posted June 21, 2018 Posted June 21, 2018 Depends which way you want to go. Stay with the monoshock, or go twin shocks? Quote
Gammaboy Posted June 21, 2018 Posted June 21, 2018 (edited) NM. Edited June 21, 2018 by Gammaboy Quote
Swiss Toni Posted June 21, 2018 Posted June 21, 2018 7 hours ago, Swiss Toni said: Depends which way you want to go. Stay with the monoshock, or go twin shocks? Just read your first post again. I see you want to stay twin shock. With a B12 arm, you'll need top hats to take the swinging arm spindle diameter down, (assuming 750 & 1100 frames are same width at 'arm mounting point). Otherwise 'arm may need mods. Get weld on lower shock mounts from Lucky 7, find a nice man who can weld, and away you go. As said before, a std. Kat/1100ET arm will fit with no mods, take a 160 no bother, or a 180 with a bit 'massaging'. Only going by my experience, as a 180 rubs against the stiffening webs on the inside of the arm. Quote
TrunKz Posted June 21, 2018 Posted June 21, 2018 monoshock I'll get a swingarm from a GSXR 1100 next week. Quote
E T Posted June 22, 2018 Posted June 22, 2018 (edited) . Edited June 22, 2018 by E T Fek'n phone Quote
micktodd Posted June 28, 2018 Posted June 28, 2018 (edited) opps Edited June 28, 2018 by micktodd Quote
R1guy Posted December 13, 2018 Posted December 13, 2018 (edited) So to resurrect this thread, an 1100 et alu swinger goes in a 750et frame?-same spindle and bearings? My mock-up is just loosely held in with a random spindle at the moment so if I just need to get a 14mm spindle turned up it will be easy- or is it a bearing swap also? Edited December 13, 2018 by R1guy Quote
Gixer1460 Posted December 14, 2018 Posted December 14, 2018 Straight swop - did it on my 750ET about 25 lifetimes ago! Quote
gsx Posted December 14, 2018 Posted December 14, 2018 750 et spindle is 14 mm and 11 16 mm . Just need bushes to suit . Have done this with a gsxr 11 arm into a Kat frame but arm needed a bit of narrowing Quote
R1guy Posted December 14, 2018 Posted December 14, 2018 10 hours ago, Gixer1460 said: Straight swop - did it on my 750ET about 25 lifetimes ago! Do you mean straight swap? Or straight swap with bushes? Or drill frame to take 16mm spindle? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.