Jump to content

Kit


Kit

Recommended Posts

Hi @Kit welcome to Oss, they're not really nasty,  pisstakin is a given though so please don't be offended.

If you take a look at rule 8 it will give you the info you require mate. Best thing to do is build a trick as fuck bandit 600 and post a pic then the last laugh will be yours:tu

 

  • Like 1
Link to comment

 the favourite forks for the bandits is GSXR1100 ones BUT !!!  they are getting really hard to find in good nick and if you do you will pay high for them, :S  the GSRX 750 (early ones) will do but they are a bit shorter than the 1100's.  their are others that people use of other makes. the problem is a lot of USD's are a bit shorter than the bandit forks and can cause handling and clearance problems, and it isn't a cheap conversion as you have to think of the wheel/calipers/mudguard and spindle. also the speedo drive.  :S the steering stem will also have to be changed. 

Edited by TonyGee
Link to comment

Welcome to OSS

You will have the piss taken out of you for the b6 but hay we all have to start somewhere (y)

As @TonyGee says the gsxr1100 are the best etc but hard to find. I know one mate who uses leak zxr/zx9r USD front ends, and are much cheaper to get.

You will pay out for calipers as they are the same for Suzuki and the kwak, of flebay you will look at around £50 each for a good set of 4 pots, you can get the 6 pots much cheaper but there is a reason for that, they are sh#t.

don't forget, when you have done the front end the b12 motor fits straight in to the 600 frame then you will want a bigger back tyre then a turbo xD

  • Like 4
Link to comment
33 minutes ago, wraith said:

Welcome to OSS

You will have the piss taken out of you for the b6 but hay we all have to start somewhere (y)

As @TonyGee says the gsxr1100 are the best etc but hard to find. I know one mate who uses leak zxr/zx9r USD front ends, and are much cheaper to get.

You will pay out for calipers as they are the same for Suzuki and the kwak, of flebay you will look at around £50 each for a good set of 4 pots, you can get the 6 pots much cheaper but there is a reason for that, they are sh#t.

don't forget, when you have done the front end the b12 motor fits straight in to the 600 frame then you will want a bigger back tyre then a turbo xD

do you know how the zxr forks compare in length to the gsxr1100's wraith ?  it would be interesting to know ;) 

Link to comment
31 minutes ago, Wagola said:

I've got some zxr , zx7r and zx12r forks if you want me to measure them ? not really OSS stuff but happy to do it !!:tu

yeah it would be nice to know for future reference :tu 

by the way GSXR1100's are, 29.5 inches from top to spindle centre, fully extended. 

Edited by TonyGee
  • Like 1
Link to comment

[thread hijack]
 

I have a blandit in the garage now, the owner asked me to service it, to change all fluids.

Now where do i take out the piss you speak about? All i found is a drain plug for the engine oil, and there is some brake fluid, but no piss anywhere. Please help. 
 

[/thread hijack]
 

  • Like 4
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...