TonyGee

when i converted my 1200 bandit engine to cable it was light as fuck, only 2 fingers needed.

buy a mechanic's stethoscope which are cheap as chips or use a long screwdriver up against the engine, it will help pinpoint the area where the noise is coming from. I have an earlier GSX750 and my engine is quiet as a mouse.

I put a B6 front wheel in a set of GSX1100E forks, the OEM spacers where bored out to take the B6 spindle and speedo drive. the disc's are close to the inside of the legs but enough room to be safe. had to make calliper mount brackets for callipers. with a bit of jiggery pokery anything is possible

Have you thought about the tyre ? is it worn ? is it the right size ? would a different size make a difference ?

cool, looks like ive got a fat one too

very rich !!!!! try screwing the fuel screw in a bit.

they look stamped to me not etched !!!!! just not very deep. ive seen some dodgy stamped numbers on new 80's bikes they are a lot neater now though.

yep, done the same thing.

you wouldn't get them in from the right with the bike lying on its right side

haha yep

haha, yeah thats very true

yeah their should be a key number on the body of the lock, you will have to remove it from the yoke. some after market locks don't have numbers though !!!

thats gona need a bit of spit & polish

yeah they used the 16v engine as well I remember looking through the window of our local Suzuki dealer back in the late 70's at the 750 and 1100 L's that where sat their. dreaming of buying one

looking at the none katana GSX1100 engines on the suzuki parts list shows the 80-81 with the "16 hole cover" and the 82-83 with the "20 hole cover" don't know about the Kat engines though.

tyre pressures look much better

this gasket is for the 24 hole cam covers, but it had 20 holes as the 4 holes behind the chrome end covers dont need any. Fits Suzuki GS1100 24 bolt cam cover gasket usa made. Cometic | Eblag

is this what you are looking for ? 83 on had the extra 4 bolt holes round the cam chain tunnel. has 24 bolt holes. as far as i know their is just the 2 types ??????? suzuki gsx1100 cam cover classic vintage | Eblag

it must be good stuff as "delboy" uses it

the 600/650 bandit swingarms look identical so im pretty sure they'll fit, you can even fit a 1200 bandit swinger to a 600.

when/if he can find one

might help if we know what bike you are talking about ?

It depends on where its leaking, if its leaking inside the venturi of the carb then its likely to be the float valve, if its coming from the top of the float bowl (where the gasket is) then it could be the gasket, but if the carbs are sat upright (float bowl horizontal) the fuel shouldn't get that far up !!!! also check the pipes connecting the carbs together.

any, all the same, 2000 on they had a hole in the cover for the speedo sensor.

silly boy hopefully they won't leak