Chay

Ta Arttu Will measure them as see what's best before I order from fowlers

Yeah plus new bearings,seal and the spindle from your old cover. Think the bandit gsxr sight glass might fit

Wondering if these ape covers can be machined to take a sight class.ive seen some that have but maybe they came like that

Got Dyna S but kinda wishing I'd gone for 2000 But ignatech been on the go a while now Motors good spec so wanting to make the most of it

Anyone here using ignatech on their GS/gsx? Wondering what's the best between Dyna 2000 & ignatech

I'd go for 10 mm offset front sprocket Will allow you to upgrade to b12 wheel an 170 tyre without notching frame

Stock arm is good.bandit 12 arms can foul on the brake spring mount if you use off the shelf top hats and are running standard foot pegs etc

I have a b12 wheel with a 170 tyre in the standard et swinger Used the gsx sprocket carrier and 10mm offset sprocket 18/48 530 . Gsxr1100 m torque arm mounted to the centre stand mount

Its only going to be temporary. Have a clock set from an 1100m somewhere Just wondered if it would work till i have the cover off again

Can anyone recommend an alternative rev counter for gsx1100et Im using the standard clocks and want to keep them. The tacho drive is blanked off at the momen and a will probably put drive gears in it later when the camcover is off. But in the mean time can i use a tacho from a later gsxr if i make up a bracket?

Wanted tobdo away with the torque arm so got this made and welded on Still to get the swinger painted over the winter time

Few more wee bits done on my et Rear caliper mount done and footpeg bracket altered so it clears the vance and hines New brake pedal to make and hope thats the back end fixed

Fittings and hose from torques uk are good quality and value Not expensive to make up your own lines

Ta just having a go at making some bits myself. you can buy the brackets to fit but only cost a few quid to make these

Did some more wee bits to the 1260. Made some cooler mounts and finished the clock mounts for the bandit yokes