davecara Posted October 8, 2019 Share Posted October 8, 2019 On 9/28/2019 at 6:42 PM, wobblegob said: Apparently started making frame kits again. was talking to them yesterday about this bike just wanted to make sure it was a martek. I bought this very cheap of an old chap that is packing up biking. He knew what it was worth but let it go cheap to get it out of his way ................my win there then. Another bike on my bucket list! I saw on FB that hes making XR69 swingarms, hopefully frame kits wont be far behind! Quote Link to comment
Duckndive Posted October 9, 2019 Share Posted October 9, 2019 15 hours ago, davecara said: Another bike on my bucket list! I saw on FB that hes making XR69 swingarms, hopefully frame kits wont be far behind! You may want to find someone who as actually taken delivery of said item's before parting with any $$$ 5 Quote Link to comment
wobblegob Posted November 13, 2019 Author Share Posted November 13, 2019 would i vastly devalue this bike by powdercoating the frame lol Quote Link to comment
clivegto Posted November 13, 2019 Share Posted November 13, 2019 (edited) 5 hours ago, wobblegob said: would i vastly devalue this bike by powdercoating the frame lol I would be tempted to powder it but don't think I could bring my self to do it. Your bike now though so your way. Edited November 13, 2019 by clivegto Quote Link to comment
wobblegob Posted November 13, 2019 Author Share Posted November 13, 2019 really dont like polishing lol. but dont wanna make it worthless if i ever sell it Quote Link to comment
Dezza Posted November 14, 2019 Share Posted November 14, 2019 If you use Belgom you won't have to keep polishing it that much. An alternative is to scotchbrite it (and then use Belgom...). If you want it another colour then fair enough it's your bike but it would probably be prudent not to do it with something that takes just a little bit less than a nuclear strike to get it off (i.e. powder coat) and paint it instead. 1 Quote Link to comment
clivegto Posted November 14, 2019 Share Posted November 14, 2019 I use grey scotch bright on my alloy tank with GT85 or you could use a wax sealant. Doesn't take a lot of work to keep on top of & I hate cleaning. The frame by the way is powder chrome in the pic. 3 Quote Link to comment
Blue Posted November 17, 2019 Share Posted November 17, 2019 Not martek but looks good painted imo Quote Link to comment
Diebythereaper Posted November 17, 2019 Share Posted November 17, 2019 Polish with autosol/belgom/ whatever then seal with two coats of good carnuba car wax (pay for it) and then keep frame out of a damp shed When ride and it gets wet and you get home blow it off with an airline and wipe dry with a cloth and away you go If you leave the water sitting on the frame it will "pit" it when it corrodes All the joys of owning an aluminium tubular frame, if it is not for you then maybe sell the bike on but do not powdercoat or anything that cannot be easily reversed - just my two cents from having owned one for many years 1 Quote Link to comment
Captain Chaos Posted November 17, 2019 Share Posted November 17, 2019 On 11/13/2019 at 3:43 PM, wobblegob said: would i vastly devalue this bike by powdercoating the frame lol fuck it. Your bike, you ride it, do whatever is conveniant for you. And IMO powdercoated the right colour looks better than half-arsedly polished. Quote Link to comment
wobblegob Posted November 19, 2019 Author Share Posted November 19, 2019 gonna put it up for sale see if theres any interest 1 Quote Link to comment
Stuntmonkey Posted May 23, 2020 Share Posted May 23, 2020 Have martek started making big tube frames again ? Quote Link to comment
busa ash Posted May 24, 2020 Share Posted May 24, 2020 Yes i beleive so but be very careful , until a few people have actually received what they have ordered first . Martek, mk engineering . Have a spotty reputation on previous orders . Deposits taken etc nothing received . They do and have made some nice frames and swingarms in the past. 1 Quote Link to comment
cnap504 Posted October 17, 2021 Share Posted October 17, 2021 On 11/19/2019 at 5:05 AM, wobblegob said: gonna put it up for sale see if theres any interest Will a 2 valve 1000 fit in this frame without too much trouble? Quote Link to comment
Gixer1460 Posted October 17, 2021 Share Posted October 17, 2021 10 hours ago, cnap504 said: Will a 2 valve 1000 fit in this frame without too much trouble? Not a fuckin' hope in hell ! GS engines are about 4" / 100mm bigger in every direction that matters! Now a teenie tiny watercooled modern GSXR1000 could be a hoot! Quote Link to comment
yantosh Posted October 18, 2021 Share Posted October 18, 2021 On 10/17/2021 at 1:14 PM, Gixer1460 said: Now a teenie tiny watercooled modern GSXR1000 could be a hoot! i can confirm that 1 Quote Link to comment
370steve Posted October 18, 2021 Share Posted October 18, 2021 On 10/8/2019 at 10:48 PM, davecara said: Another bike on my bucket list! I saw on FB that hes making XR69 swingarms, hopefully frame kits wont be far behind! SNT Race engineering make excellent XR69 frame kits Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.