Fjbj40 Posted February 26, 2017 Share Posted February 26, 2017 Hello all, I have been a lurker on and off for several years. Regular member at GSResources. I have a 1978 GS1000/1085 compliments of Poppy Yosh, slightly modified and a 1983 GS1100ESD currently being restored. Cheers, Daryl 11 Quote Link to comment
R1guy Posted February 26, 2017 Share Posted February 26, 2017 Welcome!!! Cool Gs Quote Link to comment
agemax Posted February 26, 2017 Share Posted February 26, 2017 Hi Daryl, welcome to the site. Quote Link to comment
Swiss Toni Posted February 26, 2017 Share Posted February 26, 2017 Hey Daryl! Welcome in! Quote Link to comment
Fjbj40 Posted February 27, 2017 Author Share Posted February 27, 2017 Thanks gents, here is the 1100 when I first bought it, not bad for $500.00 Cdn! Then in the rebuild process. 2 Quote Link to comment
KATANAMANGLER Posted February 27, 2017 Share Posted February 27, 2017 Hello and welcome. Quote Link to comment
Blubber Posted February 27, 2017 Share Posted February 27, 2017 Welcome. cool bikes Quote Link to comment
SiBag Posted March 2, 2017 Share Posted March 2, 2017 Welcome, I like the carbon wrap tank Quote Link to comment
Fjbj40 Posted March 2, 2017 Author Share Posted March 2, 2017 7 hours ago, SiBag said: Welcome, I like the carbon wrap tank It's not a wrap, it's real carbon fibre! It's real carbon epoxied to the tank, then leveled with epoxy ant then clear coated. So yes it is sort of a wrap, but it's not plastic. Quote Link to comment
SiBag Posted March 2, 2017 Share Posted March 2, 2017 (edited) Calm down calm down (to be said in scouse accent)... No one said its plastic. It's carbonfiber wrapped around your tank. I.e. carbon wrapped.... Edited March 2, 2017 by SiBag 1 Quote Link to comment
Fjbj40 Posted March 3, 2017 Author Share Posted March 3, 2017 Oops, sorry, didn't mean it to sound testy! Every "wrap" job on this side of the pond is plastic 1 Quote Link to comment
Dorkburger Posted May 29, 2017 Share Posted May 29, 2017 Hey Daryl, I just joined last night. I don't recall seeing either of your bikes over at GSR. Cool on both counts. Good to "see" you. Glen Quote Link to comment
jimbo22 Posted May 30, 2017 Share Posted May 30, 2017 HI, Please share a jet config You run on those KNs (stock vs mods) Quote Link to comment
wraith Posted May 30, 2017 Share Posted May 30, 2017 Welcome to OSS, nice modded GS (2v for you over their ) and nice 4v Quote Link to comment
paul turbo Posted June 1, 2017 Share Posted June 1, 2017 Nice gs dude-just Starting an esd with a mate.... Quote Link to comment
Fjbj40 Posted June 2, 2017 Author Share Posted June 2, 2017 On 5/29/2017 at 2:33 PM, Dorkburger said: Hey Daryl, I just joined last night. I don't recall seeing either of your bikes over at GSR. Cool on both counts. Good to "see" you. Glen Hi Glen, I had the 1000 build on the mods forum but with changes to GSR some of the pics disappeared. And I am just to lazy to reload them :-). Cheers, Daryl Quote Link to comment
Fjbj40 Posted June 2, 2017 Author Share Posted June 2, 2017 On 5/30/2017 at 9:32 AM, jimbo22 said: HI, Please share a jet config You run on those KNs (stock vs mods) Those carbs are from an gsxr1100, stock jetting, still messing with it. I am going to get a Dynojet kit this summer. I may also put the VM33 smoothies back on also, way more power with those but less streetable also. The Dynojet kit will probably wake it up though, will see. Cheers 1 Quote Link to comment
Fjbj40 Posted November 21, 2017 Author Share Posted November 21, 2017 Well I put the VM33's back on. Re sync' them with the Morgan balancer. Damn, I think I picked up 10 hp , clutch is slipping now also when she hits about 6,000 rpm. Time for new plates I guess. Winter is pretty much here so she is getting a full suspension overhaul, springs and emulators for the front and probably Podium shocks for the rear. Cheers 1 Quote Link to comment
bigyellowthing Posted November 27, 2017 Share Posted November 27, 2017 Nice GS and ES Quote Link to comment
RUSSP Posted November 28, 2017 Share Posted November 28, 2017 Nice bikes like the oil cooler plumbing Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.