NLenton Posted June 27, 2016 Share Posted June 27, 2016 Photo taken last year before it fell ill 8 Quote Link to comment
Poldark Posted June 30, 2016 Share Posted June 30, 2016 So what's wrong with it now? 1 Quote Link to comment
kitkatman Posted July 3, 2016 Share Posted July 3, 2016 If you built this bike could you tell me how you fitted the rear wheel into the ET swingarm, what clearance is there between tyre/chain etc. Thanks in advance. Quote Link to comment
Peterrr Posted July 3, 2016 Share Posted July 3, 2016 I have the same wheel in a standard katana swingarm. I'm using a a brake caliper from a GSX750F, a 170 tyre, and I forgot what sprocket carrier,,, I think the stock one. I also use a 14mm offset sprocket on the front and the chain (530) runs clear from the frame, and from the tyre. And I made a few spacers to make it all fit. Quote Link to comment
NLenton Posted July 4, 2016 Author Share Posted July 4, 2016 Hi yes i did help build the bike however the frame needed a small mod as it also runs an offset front sprocket Quote Link to comment
kitkatman Posted July 5, 2016 Share Posted July 5, 2016 Hi, thanks for replies, could you tell me what size tyre and wheel you are useing. At the moment I have a 4.5 inch wheel in the arm with out a tyre and everything is ok, but when I put the 5.5 wheel in chain(530) is to close to tyre/frame etc.I know I would have to use an offset eng sprocket not a problem. Thanks. Quote Link to comment
kitkatman Posted July 5, 2016 Share Posted July 5, 2016 PS What sort of frame mod. Quote Link to comment
Rene EFE Posted July 5, 2016 Share Posted July 5, 2016 On 27-6-2016 at 8:15 PM, NLenton said: Photo taken last year before it fell ill Lovely. What's the diagnose doctor? Quote Link to comment
NLenton Posted July 6, 2016 Author Share Posted July 6, 2016 ok it sounds a bit drastic , however its modded professionally where the chain run pasted the frame, its cut half way through, and then in filled with cut to shape replacement piece material the wheel is 5.5 inch from a suzuki 1200 bandit i will take a photo at the weekend and post it Quote Link to comment
Nigkat Posted July 7, 2016 Share Posted July 7, 2016 Was this one a Steve Adams lucky seven build ? looks familiar. 1 Quote Link to comment
NLenton Posted July 9, 2016 Author Share Posted July 9, 2016 well spotted check out this http://www.lucky7moto.com/blog/ 1 Quote Link to comment
busa ash Posted July 9, 2016 Share Posted July 9, 2016 top quality looking gsx et Quote Link to comment
faker Posted July 17, 2016 Share Posted July 17, 2016 That's a lovely looking bike Quote Link to comment
KATANAMANGLER Posted July 18, 2016 Share Posted July 18, 2016 What ails this fine beast? Quote Link to comment
arnout Posted July 19, 2016 Share Posted July 19, 2016 On 18-7-2016 at 3:54 PM, KATANAMANGLER said: What ails this fine beast? NLenton isn't very forthcoming with revealing the nature of the ailment in this topic, but earlier he started this battery-killer-topic which probably tells the story.. Quote Link to comment
NLenton Posted July 20, 2016 Author Share Posted July 20, 2016 Hi The problem is that it kills a battery once a year, Left standing for more than a week the battery is dead and need a re charge i have now replaced battery with a gel type (fingers crossed) and re built the starter motor as i noticed the live terminal was moving around and felt wrong on inspection the plastic/nylon inner washer was destroyed and the brushes badly worn battery is charging on the multi meter so lets wait and see Quote Link to comment
Gixer1460 Posted July 20, 2016 Share Posted July 20, 2016 Without sounding too obvious you've got a permanent drain somewhere! Alarms are famous battery killers - I mullered an expensive gel unit when I locked the steering in the park position so the front side light was on - no back lights at the time - and as it was facing a wall I didn't see the tiny glow for 3 months = flat as a sheet of paper ! Out with the multi meter and check draw on each fused circuit. Quote Link to comment
arnout Posted July 20, 2016 Share Posted July 20, 2016 1 hour ago, NLenton said: Hi The problem is that it kills a battery once a year, Left standing for more than a week the battery is dead and need a re charge i have now replaced battery with a gel type (fingers crossed) and re built the starter motor as i noticed the live terminal was moving around and felt wrong on inspection the plastic/nylon inner washer was destroyed and the brushes badly worn battery is charging on the multi meter so lets wait and see Have a look at the topic you opened specifically for the "battery-killing".. I reckon there is no drain, the battery simply gets a beating from the poor charging circuit.. Compare the multimeter readings at tickover and over 5000 rpm.. That should demonstrate the problem.. Quote Link to comment
NLenton Posted July 22, 2016 Author Share Posted July 22, 2016 thanks to everyone for your replies Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.