R1guy Posted January 27, 2016 Share Posted January 27, 2016 Hi All Has anyone got suggestions on a decent exhaust that the collector is flat, instead of all 4 down pipes going into a tube? The problem I've got is that the Harris pipe I'd planned to use hangs too low and will scrape before I bottom the suspension out. I plan to use the tallest profile tires I can, but I'm still concerned . Any suggestions appreciated Guy 1 Quote Link to comment
R1guy Posted January 27, 2016 Author Share Posted January 27, 2016 similar to something like this.... Looks pretty custom Quote Link to comment
vizman Posted January 27, 2016 Share Posted January 27, 2016 the dudette has a set of sebring headers and collector on her 1100, it has a 4 into 1 flat collector, I think exhaust craft based in Whitehaven can do you a similar [if not better] set up in s/s. 1 Quote Link to comment
Dezza Posted January 27, 2016 Share Posted January 27, 2016 I will recommend Exhaust Craft - he recently made me a spiffing set of headers and a collector, and did not charge a fortune for doing so. 1 Quote Link to comment
clivegto Posted January 27, 2016 Share Posted January 27, 2016 My 1100 efe also has a sebring flat collector box and down pipes, its got quite a big bore as well. Quote Link to comment
Blubber Posted January 27, 2016 Share Posted January 27, 2016 Yep Sebring has the flat collector you need Quote Link to comment
melkweg Posted January 28, 2016 Share Posted January 28, 2016 (edited) http://www.wemoto.com/bikes/suzuki/gsx_1100_sd_katana/83/picture/marving_master_4_1_complete_system/ http://www.wemoto.com/bikes/suzuki/gsx_1100_sd_katana/83/picture/marving_racing_4_1_complete_system_-_black/ Edited January 28, 2016 by melkweg 1 Quote Link to comment
melkweg Posted January 28, 2016 Share Posted January 28, 2016 http://old-skool-suzuki.proboards.com/thread/1680/marving-master-1100-katana Quote Link to comment
Bert Posted January 28, 2016 Share Posted January 28, 2016 http://oldskoolsuzuki.info/forums/index.php?/topic/2019-new-member/ Quote Link to comment
sparki Posted January 28, 2016 Share Posted January 28, 2016 marving ones are nice, black chrome too... little on the loud side but nicer collector. quality seemed ok on mine Quote Link to comment
R1guy Posted January 28, 2016 Author Share Posted January 28, 2016 The marving ones do look smart..... Especially in the black chrome Quote Link to comment
bigyellowthing Posted January 28, 2016 Share Posted January 28, 2016 Hi Cool project. I have a similar set-up and a Marving. I'd buy the Master as my Race is annoyingly noisy. Quote Link to comment
Dezza Posted February 1, 2016 Share Posted February 1, 2016 As requested by R1g, I have posted a pic of my EC headers/collector. I am sure Ec would do the collector with the headers all side-by-side if requested. There is a picture of this arangement on the EC website. Shame about the pic quality but the size restrictions do not enable me to post a better pic. 1 Quote Link to comment
Mr farty Posted February 6, 2016 Share Posted February 6, 2016 Plus one for Dave at Exhaust craft. He built my exhaust system, big bore tubing and flat collector box for a very affordable price 3 Quote Link to comment
saffa Posted February 29, 2016 Share Posted February 29, 2016 what does one of those set you back then? Quote Link to comment
Blower1 Posted March 1, 2016 Share Posted March 1, 2016 I have Delcevic Bandit 1200 downpipes in my GSX 1100 EFE. It´s not a flat 4-1 but it is quite close to the oil pan. Quote Link to comment
spndi Posted January 13, 2017 Share Posted January 13, 2017 On 01/03/2016 at 8:29 AM, Blower1 said: I have Delcevic Bandit 1200 downpipes in my GSX 1100 EFE. It´s not a flat 4-1 but it is quite close to the oil pan. hi,i looking for my kat 1100 efe engine a good exhaust ,in this picture is a standard downpipe bandit 1200?its put in efe? Quote Link to comment
Blower1 Posted January 13, 2017 Share Posted January 13, 2017 3 hours ago, spndi said: hi,i looking for my kat 1100 efe engine a good exhaust ,in this picture is a standard downpipe bandit 1200?its put in efe? No, it´s are Delkevic made downpipes for bandit 1200. Quote Link to comment
no class Posted January 14, 2017 Share Posted January 14, 2017 Hindle make a stainless steel 4-2-1 that hugs the oil pan ..... gsxr11......i seem to recall they fit the aircooled lumps as well . had one on my old fighter . Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.