fatblokeonbandit Posted July 1, 2020 Posted July 1, 2020 I think I might need some new exhaust bolts!!!! 3 Quote
Gixer1460 Posted July 1, 2020 Posted July 1, 2020 You think? Sweeps on how many break - i'll go 3No. Quote
fatblokeonbandit Posted July 1, 2020 Author Posted July 1, 2020 an actual wider shot Ok look it was cheap 4 Quote
wraith Posted July 1, 2020 Posted July 1, 2020 You can't beat cheep I bet there still is some steel in them bolts, most probably the bit that is self welded it self into the head. 2 Quote
Captain Chaos Posted July 1, 2020 Posted July 1, 2020 4 hours ago, fatblokeonbandit said: Ok look it was cheap Of course it was, the wheels are the wrong colour. #WhiteWheelsMatter 1 Quote
fatblokeonbandit Posted July 1, 2020 Author Posted July 1, 2020 The wheels will be white eventually, if the fekin powder coaters ever open again!!!! anyway 3 came undone i had to drill the heads off of 5 better than i thought.. 1 Quote
clivegto Posted July 1, 2020 Posted July 1, 2020 LSN powder coaters in Castleford are open. Bit of a journey from the center of the universe I would imagine. Quote
Gixer1460 Posted July 1, 2020 Posted July 1, 2020 1 hour ago, fatblokeonbandit said: The wheels will be white eventually, if the fekin powder coaters ever open again!!!! Wash them in salty water, let them corrode white, the clear coat ! LOL! Quote
fatblokeonbandit Posted July 1, 2020 Author Posted July 1, 2020 47 minutes ago, clivegto said: LSN powder coaters in Castleford are open. Bit of a journey from the center of the universe I would imagine. Castle ford? Where the fek is that, Scotland!! 2 Quote
fatblokeonbandit Posted July 5, 2020 Author Posted July 5, 2020 and the exhaust bolt gods were smiling non me, and my new stud extractors. 6 Quote
buff Posted July 5, 2020 Posted July 5, 2020 So whats best after this, fitting studs or just new bolts and plenty of copaslip ? Quote
wraith Posted July 5, 2020 Posted July 5, 2020 What sort of extractor is that? Not seen one like that, looks good. Quote
fatblokeonbandit Posted July 5, 2020 Author Posted July 5, 2020 I got them in Sears tool department, over in Trumpland last time i went to see my mate in Texarcana.. craftsman stud extractors.. 1 Quote
fatblokeonbandit Posted July 6, 2020 Author Posted July 6, 2020 21 hours ago, buff said: So whats best after this, fitting studs or just new bolts and plenty of copaslip ? Studs when I can find some 2 Quote
Wagola Posted July 6, 2020 Posted July 6, 2020 3 hours ago, fatblokeonbandit said: Studs when I can find some @fatblokeonbanditHi, got the same problem on my GSXR1100 lump. whats the best method to re-fit the exhaust studs ? stainless studs ? and what nuts ? stainless or copper ? thanks Quote
fatblokeonbandit Posted July 6, 2020 Author Posted July 6, 2020 ive used these before, stainless with stainless nuts.. BUT i dont ride in the rian and i take stuff part all the time so no problems with seizing nuts.. copper flashed nuts would be good if your worried.. 3 Quote
Badger76 Posted July 6, 2020 Posted July 6, 2020 On 7/1/2020 at 8:43 PM, clivegto said: LSN powder coaters in Castleford are open. Bit of a journey from the center of the universe I would imagine. LSN are in West Yorkshire, only a few miles from me Garry if you need help with anything. Quote
fatblokeonbandit Posted July 6, 2020 Author Posted July 6, 2020 (edited) MMmm Yorkshire?? I've heard of that, isn't it up north near Jimmie Crankies country.. Cheers for that matey im hoping our local one in Brizzle will be open soon, Griffs reality Motorworks, he only dose bike and car stuff. Edited July 6, 2020 by fatblokeonbandit Quote
fatblokeonbandit Posted July 10, 2020 Author Posted July 10, 2020 new studs and a tin of PJ1 later 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.