Jump to content

Captain Chaos

Moderators
  • Posts

    5,879
  • Joined

  • Last visited

Everything posted by Captain Chaos

  1. Thanks for the pic. Yes it was a lot of work. Actually I don't think I have ever seen it completely finished, I don't remember that paintjob.
  2. Actually they could be Inazuma 1200 carbs.
  3. has 36mm carbs. These look like B6 carbs to me. What's the spacing between 1-2, 2-3 and 3-4?
  4. ... who had built a TL1000-engined Duc 916? And posted a build thread with many pics on the old forum? Anybody has some pics of that bike by any chance?
  5. a coil is just that, a coil. It doesn't matter which way you connect it.
  6. it might very well be slightly faster.
  7. read the first post and you will know
  8. Can you not move stuff Viz? You also have moderator powaaaz.
  9. changed the brake lever recently? Symptoms sound like a blocked return hole in the master cilinder. Riding = fluid warming up = expanding = more brake pressure, also when you don't need it.
  10. check out a site like http://www.jtsprockets.com/catalogue and find out which front sprockets fit which bikes. A lot of Kawasakis for example use the same splines.
  11. at 50 pounds it's a f*cking expensive mod. Remove the ignition pick-up ground plate, slot the mounting holes, done. One mm on the edge of the plate corresponds roughly with one degree retard/advance.
  12. have been using Valvoline Durablend for 15 years without any problems, in my own and in customers' bikes.
  13. don't write that shit anymore and you are forgiven
  14. don't push your luck there dude
  15. Scott I will PM you where it is and you pick it up in the morning ok? My wife knows everything.
  16. slabby has two pick-ups (at the crankshaft), B12 has one. Only a slabby CDI will work with the slabby pick-ups/loom.
  17. by luck I have a teapot at work now. As far as I can measure, the teapot hub is 4mm narrower than the Slingy one.
  18. voorspatbord Nice bike. Best engine upgrade is an 1100 by the way.
×
×
  • Create New...