manden
-
Posts
469 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by manden
-
has any one tried one with gsxr cams in it+ is it worth the money and effort or must it be real cams to make a decent difference? sry for the hijack but seemes like the place to ask
-
i also think it runs on a single map anyway. so no difference
-
my clutch basket is shot on my 89ยด engine. does any one has suggestions for an cheap, light weight and strong clutch solution? thanks
-
old fzr1000 has one that fits and flows a little better
-
Maybe just baffle the tank when it's open. Make a better low point for fuel exit, and a better flowing fuel crane
-
Cush rubbers maybe?
-
I'm thinking of doing it to mine as well. Prolly give a 23l tank :)
-
145 probably gaivea a good nice lean top end, but extremely lean in the mid range. There should be a small mid range jet on those carbs. Maybe give em a couple of sizes up
-
Could be something like that
-
I've got an 1990 750 head on one of my 1100 engines. And it is an shims head. 1992 was the first water-cooled 750
-
On the 750 the l and m have shims head on the 1100 the m and n have shims head
-
Sorry I can't remember exact enough
-
i have 91 yokes with an gsxr1000 k6 legs in it and its like night and day, but i did also had other brakes and a good front rim upgrade at the same time. the actual ride hight wasnt lower in the front.
-
Looks awesome with the wheels. Triumph?
-
No. Haven't had the disiplin to have turbo bikes ;)
-
I think I'll might hit 190hp if it all works well together. Now I'm at 160ish
-
just checked and found this: https://www.Eblag.co.uk/itm/Cometic-Base-Gasket-005-Copper-C8246-Suzuki-GSX1100F-Katana-1100-GSX-R1100/383268686042?epid=214738069&hash=item593c9808da:g:6CAAAOSw0fZdzwhc
-
i bought an copper gasket that was 0.254mm thick uncompressed on fleabay. not that they compress much but it will help you. i have 11,7 comp on the 1108
-
ive driven an zzr1400 quite a bit and it works fine. ite more the cornering with supercorsas i was thinking on. i think i can feel a little flex, but im not sure it can be other stuff
-
Hahaha
-
Start by tapping it. Then put in an wurth rethread insert. Dunno the English name for them
-
Pull some pressurisation on the 40mms like on the kawa streetfighters, then it's only off throttle they stink
-
As topic says: is bracing the swingarm worth the trouble on an 1100 slabside with some extra ponies? Thanks in advance
-
Get tps from 36mm bandit mikuni and remember there is a light pressurized part of the 40mm carbs
-
Someone is selling stands on fleabay
