Jump to content

manden

Members
 View Profile  See their activity

  • Posts

    469

  • Joined

  • Last visited

 Content Type 

Everything posted by manden

  1. manden
    decked 750 shims head. should have been in the info
  2. manden
    the "new" engine ive purchased from mats and is building into a beast is in need of a clutch. my question is. what complete clutch has the lowes rotating mass. thanks in advance boys
  3. manden
    Should be 12.04:1 with the busa rod, R1 piston and 58mm crank. And 13.18:1 with the busa rod/piston combo and an 58mm crank.Fast calculations made with 14cc chamber and a 1.8mm compressed gasket
  4. manden
    Not what I was looking for, but thanks for chipping in m8
  5. manden
    I'm not looking for open chamber. Just if someone had calculated what comp would be with busa rods and pistons for n/a. I would like to use r1 big bang pistons on busa rods but I'm not sure they will fit well.
  6. manden
    I was about to do the same, but chickend out and did an 525 with aluminium rear sprocket
  7. manden
    Has anyone actually checked what the cr becomes with busa rod/Piston combo on an 58mm and 59mm crank shaft?
  8. manden
    how does it handle? at what rpm do you have full boost?
  9. manden
    Thanks mate
  10. manden
    any one knows the base circle of the cams? and will they go in an rf900 head? a friend has been offered some race cams from an 1100 he is thinking on dropping in an rf900
  11. manden
    After I saw yours I've been thinking alot of doing it to mine. I think there's a bit larger Mercedes charger as well. I'll try and find it
  12. manden

    piston hight

    manden replied to manden's topic in Oil Cooled

    Thanks mate
  13. manden

    Carb jetting

    manden replied to Tpot's topic in Oil Cooled

    Try 140, prolly 40 on the slow jet
  14. manden

    piston hight

    manden posted a topic in Oil Cooled

    Anyone knows the difference in piston hight on the busa Pistons and the standard gsxr 78mm pistons?
  15. manden
    What is your oil temperatures?
  16. manden
    +1 Haven't heard the seals before but could be so
  17. manden
    ordered new. .003
  18. manden
    What's the weight of the stroker cranks?
  19. manden
    I bought bearings for the slingshot, but it doesn't feel right. Like it's gnawing or something
  20. manden
    I do all the time. But it turns it self on again when rebooted
  21. manden
    Damn I don't like these word changers on the mobile. I've got and slabside with slingshot Tee's. What bearings to use for the stem?
  22. manden
    ive slingshot bought bearings for mounting slingshot front end on an slabby, but they dont seems to be right. what bearings to use?
  23. manden

    jet a 750

    manden replied to manden's topic in Oil Cooled

    It's an 1990 slingshot
  24. manden

    jet a 750

    manden posted a topic in Oil Cooled

    A friend of mine have an 750 Wich I have donated a set of 36's and rubbers for. The bike has full Yoshi exhaust so I was thinking if something like 35/130 Any suggestions?
  25. manden
    What's the advantage by running the smaller 1052 pan?
×
×
  • Create New...