clivegto

Don't want to get it dirty now Still got the Turbo Scratcher for that but don't want salt on that aither. Scratchers twin might need finishing

New front tyre also fitted new wheel bearings while the wheel was out, just coz

Yes.

Pads look a bit like the nisin earl blade ones.

Been running around on mini Scratchers plate lol.

Got a smaller number plate at the automobile today.

Nice

Good cases, I have 2 sets.

Just to add the super finished gearbox is as slick as a very slippery thing that's verry slippery indeed.

Bike is running really well tonight.

Yes otherwise the tank would have had to be resprayed

1100 slabby shock is longer than the 750. I used an early r1 shock on my 750.

Origanal fitting. today

Thanks

There was no paint even near the bolt holes. Maybe I over tightened it as the Cork had squished out a bit as well.

After a bit of thought I got some 1.2mm brass sheet and whitteld it into a big washer shap to fit over the filler cap. I cut the bubbled up paint of from around the filler cap. Refitted the cap masked it of round the cap then stuck the brass washer to the tank with part sealant adhesive. Am quite pleased with the end result.

Paintwork started to bubble up all the way round the filler cap on the petrol tank. I used a Cork gasket and blue hylormar to seal it. At first I thought petrol had got under the paint but on further investigation it hadn't. Perhaps it was the solvent in the hylormar but I don't think so. Was a bit gutted at the time.

Can you tell what it is yet

Yes the 1052 cam cover is a magnesium alloy mix.

Ride it then fix it up.

Got it of a Polish lad on Turbo FB page. Seems to work alright so far but another member on hear did fit a bronze Bush to his. Might fit a shim my self as it looks like the oil pressure forces it outwards.

I am a farmer

Carnt get away with it round hear like you and I don't have a get out of jail free card like what you do.

Went to local car shop to get a number plate for the Harris. Had to show them the logbook and my driving licence before they would make me one which cost £7.80. I then promptly took it home and cut it up with the grinder.