Jump to content

no class

Members
 View Profile  See their activity

  • Posts

    1,979

  • Joined

  • Last visited

 Content Type 

Everything posted by no class

  1. no class
    Yes
  2. no class
    AMA superbike.
  3. no class
    ..... dealing with limited space on the Kat.....would fitting the bov before the intercooler suffice ?
  4. no class
    You are going to need a new pivot shaft...., source one from a kwak zrx1200.... it will fit real nice
  5. no class
    That waa'nt so bad now was it ? You broke your cherry ! There's no stopping you now ! Muahahahaha
  6. no class
    Slabby fenders look cool in a minimalist way.....Vfr 750 interceptor (83-84) as well
  7. no class
    Sweet cherry picker !
  8. no class
    Why .... yes.... yes it was .
  9. no class
    Funny thing..... for some reason boiledude does'nt come around no more and my headaches have stopped . As for the chain alignment.... we shall set you straight .
  10. no class
    Back in the day head coolers were mounted where the headlight sits.....or under seat with a fan .... you have some work to do
  11. no class
    Brian.... you may want to make some changes to the frame bracing..... flat plate gussets will not offer tortional rigidity. Box section plates or tubing is the way to go .
  12. no class
    I can't recall if a b12 cylinder block drops onto the 1127 motor without opening the case..... such as a 1127 cylinder to a 1052 case.
  13. no class
    Welcome to the site. Show us your rides.....
  14. no class
    chop chop
  15. no class
    Then stop the shenanegans and get to it ....
  16. no class
    De-pin the wiring from the plug block..... swap into new plug block . Check color coded wires beforehand .
  17. no class
    Ask him about his b12 motor....he blew the motor from poor tuning / build ..... there may have been some debris coming in contact with the impeller wheel /exhaust side...... get a few pics from that area.
  18. no class
    Get some penetrating oil (wd40 specialist / liquid wrench etc...) spay down the cylinder studs , oil drain pipes.... let soak and repeat the process....don't be in a rush with the lump hammer and block of wood as this is where you break fins and damage casings .
  19. no class
    K&N sell a filter sock....so yes....they are available .
  20. no class
    Still waiting .....
  21. no class
    Waiting ......
  22. no class
    Do it ! Do it now !
  23. no class

    New Gs owner

    no class replied to Dixie's topic in Air Cooled

    Welcome....but perhaps you should read the rules first....
  24. no class
    If you go the 1052 bottom end route..... either way the case needs boring to fit the cylinders. I would source a b12 block as it will be better than the 1127 for larger bore .
  25. no class
    1127 barrels to 1052 cases will need boring as well.
×
×
  • Create New...