R1guy
Members-
Posts
2,417 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by R1guy
-
He’s right you know. I also stripped a thread in a Nissin 4 pot caliper. @Pegleg( at the time) had the correct timesert kit to very kindly help me out. If you speak to him nicely he may be able to assist you. The repaired caliper only ever saw track use and was all good for the remainder of my custodianship of the bike.
-
1127 or 1157 kit. Usually come with crankcases, gearbox and a head. Cost between £400-£600
-
How’s the clutch enjoying those dyno figures?
-
Assuming draw-through ? Do you actually want 90s? 2 of the 4 cylinders need to go into the front part of the collector- this means the need a little less than 90degrees? see pics for reference:
-
Have you made your headers yet? pics please
-
Apparently standard 14 Downpipe diameter is 42mm. I believe the 11 flange bolt spacing is circa 62mm with an exhaust port of 46mm. In sure someone who owns a 14 will come along shortly with some dimensions.
-
Do we know gsx14 flanges fit an 11? Downpipe diameter and hole spacing the same? ( hoping the answer is Yes- Delkevic do 4 for £40)
-
Made to order or bought as stock? ( I know he makes all of them, I guess the question is did you commission it?)
-
Headlight cowl and chrome bezel look stock
-
-
-
-
Chaps, let’s not beat around the bush- why not fit a regular oil boiler turbo’d motor.
-
Looks pretty clean- live in your front room?
-
GSx1100 Dresda Solitaire (I may have had a Clivecident).
R1guy replied to imago's topic in Trick Frames
Harlequin -
Did you get anywhere with this? Bikes discussed in thread are all still for sale?
-
Just to bump this thread: I just picked up a set of 750 pump gears (38 and 29 tooth respectively ) for £50 from the ‘Bay. Online breaker had a motor he was splitting and accepted a cheeky offer. Point of this is- deals are still out there and you don’t need to spend out £250 for two gears.
-
Videos or it never happened
-
GSx1100 Dresda Solitaire (I may have had a Clivecident).
R1guy replied to imago's topic in Trick Frames
Surprised no one has suggested Draw-thru yet… edit: for the sake of variety, or a blow -thru… -
@wobblegob Pics of it installed correctly after you epiphany?
-
-
Pics of said race bike?
-
SPS do some pretty trick ones