wraith

All looking good Ash

Both 600/750 will fit in a gs550 frame.

Looking very nice.

I have some b6 forks on my GS1000 fighter, I've put GSX600f HD springs in used a RF600 3.5" rim front wheel (that gos strate in) using the b6 disc's made some brackets up to use gsxr 4 pots

OK, never seen this before... Started the gsx1100f powered Kat up just to keep it happy over winter. Been outside, under a nylon type bike cover. (I have the braided hose and stainless mesh filtered crank case breather up between the outside of number 4 carb and cam cover). Wheeled it around a bit, including sitting on it, no static noticrd. BUT - When I pressed the start button I saw a spark go from the outer upper side of the cam cover to the breather filter and that then gave a small flame. It has a Dyna 2000, Dyna coils and ht leads. Not started it since; suppose I ought to, but..? Any ideas what it was, or has anybody seen this before?

Which would you say are the best? For a b6 that is Just thinking as got to get round to doing the 550 kat that has a b6 motor project that I started 2 years ago but then got put on hold for other projects

Cheers, and I remember the b6 where 32mm?

Can anybody tell me what size the carbs are on a gsx600f ?? Thanks

Basically hit it (the extractor that is) hard may take 1/2 or 3 hits but it will pop off, just look out for the bits in the back piping out (springs etc)

If you have had the head off dose it turn over by hand with on spark plugs in freely???

I put them in the gs1000g as that's my day to day run about

PS frame has been braced.

Gs1000g frame, gs1000 chain drive motor, zx9r swing arm converted to twin shocks, gsxr5.5" rear wheel, b6 forks and yokes, yokes been modded and forks have gsx600f progressive spring's, rf600 front wheel, gsxr 4pots, xjr1200 tank, z650 tail piece, home made seat, b12 clocks

Now revamping Mrs W's bike

now has 1100cc Wiscco big bore, CV ported head with external oil feeds, S3 Andersen cams, HD APE valve springs, underbucket shim with titanium spring top/bottoms, APE valve guides, welded crank, HD clutch with new OEM steels, new OEM cam chian with new blades and manual tensioner, gsxr 36mm carbs, one off stainless steel zorst. That's just the motor.

This is how it looks now

been doing some work/revamping one of the gs1000, this is how it was

B6 or B12 used these on over project's

Was thinking that myself, but don't know? Do they have a different power curve?

Yes it works and been on the bike all year may have the twin pickups on it I can't remember now

OK, I am using a gsxr1100ghj (1052cc) CDU on a 1127 seems to work OK revs all the way through and dose not miss. So my question is apart from the wire connect is there any difference between the two, running wise that is ?

For all my wiring bits I always use Vehicle Wiring Products.

It's worth what you or some one is willing to pay

Same as above, most clocks but if you don't know what you're doing stick to Suzuki clocks and make life easy for yourself. PS welcome to OSS

Do the standard checks on the bike, the post is bordering.