370steve

i can only find the one part No for the lower pad (44252-00A00-57S), i have both top and bottom, but the bottom one i got is "Midnight blue" not black like the top one? does anyone know if there is a different No for the Black pad?

its an AN6 mate, just needs cleaning up a bit as the anodize on mine had built up the threads

B&C Express https://www.bandcexpress.co.uk/

Metric Dimensions Chain Pitch Width Roller Diameter 415 12.70mm 4.88mm 7.75mm 420 12.70mm 6.35mm 7.75mm 428 12.70mm 7.75mm 8.51mm 520 15.88mm 6.35mm 10.16mm 525 15.88mm 7.85mm 10.16mm 530 15.88mm 9.53mm 10.16mm 532 15.88mm 9.53mm 11.10mm 630 19.05mm 9.53mm 11.91mm 632 19.05mm 9.66mm 12.68mm Side plate thickness varies with grade and make of chain. As a rule, 1.5 to 2.6 mm. It is important for safety to join chain with the manufacturers correct Rivet Soft Link or Split Spring Link. Size, Manufacturer, and grade are often stamped on some of the side plates.

looking at it Clive, you might have to swap the two top plug screws for something a little shorter, looks like frame will be close!

fitting this to mine mate.

i hadnt even thought about that! well spotted young man

for putting a heat sensor on the engine inlet side.

which is the outlet side of the two sump oil cooler connectors?

whats up mr?

I did

Which daft twat would do that FFS

B12

I can vouch for Lucky7 quality, did a great job on my seats

hi and welcome in cant help with the head question either

yes please on the dark anodised one, PM sent

let me know if you get an answer please

I use these guys a lot https://www.Eblag.co.uk/usr/teknikr6?_trksid=p2053788.m1543.l2754

if you dont want the T drives i will take them off you

Haha knew that, it is just something that has come into my head, as i have seen other threads/posts on other OSS bikes that have had oil pump up grades done by using pumps/gears from other Models.

As title, is there any other bike gears or pump that have been used to pump more oil?

what Clive said

If you can work out a better way and still manage to get your tank on, then well done, but with the tank mounts where they are i didnt really see any other way. all the other frames shown are GSX, which dont have the same mountings!!!