Reelinfeele Posted January 20, 2018 Posted January 20, 2018 Hey all, my mikuni/motion pro push pull throttle setup is bagged. Looking for suggestions on another set up. This one only has 2k miles on it. Running rs36"s. The tube is worn out on push side and yet he cables seem to long anyway. Was looking at the Rev2 setup, but can't find info on cable lentghs. So I am not sure which one to get. Thanks! Quote
Blubber Posted January 21, 2018 Posted January 21, 2018 Had rs36 on my Efe project. Use a complete setup from a r1... Switches, brake master and the throttle assembly. Worked fine on the street for 10.000km Quote
KATANAMANGLER Posted January 21, 2018 Posted January 21, 2018 The RF 900 has a push pull throttle with integrated switch gear. Quote
Arttu Posted January 22, 2018 Posted January 22, 2018 CBR1000 (old one) works as well. Ok, I'll get my coat... 1 Quote
Jonboy Posted January 22, 2018 Posted January 22, 2018 I am using a Kat 1000 switch unit as it is twin pull and plugged straight into loom Quote
arnout Posted January 23, 2018 Posted January 23, 2018 GS750, from a year slide carbs were fitted. I believe other Suzukis (GS1000C, GT550) had the same twin cable throttle. Nice and simple as far as the switch block goes, just a start button and (black) kill switch. Made from aluminium, not plastic. Quote
SiBag Posted January 23, 2018 Posted January 23, 2018 Same as @BlubberI had R1 fitted to my RS38's Quote
nlovien Posted January 23, 2018 Posted January 23, 2018 On 22/01/2018 at 4:56 AM, Arttu said: CBR1000 (old one) works as well. Ok, I'll get my coat... thats my coat ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.