Jump to content

cregnybaa

Winged Hammer
  • Posts

    215
  • Joined

  • Last visited

Everything posted by cregnybaa

  1. Why can you only go to 775?? where are you intending to run the bike and what class??.
  2. Yes 1127 crank will go into 1052 cases, if I remember you have to open the cases a little to get the 1127 cylinder to go on. the last engine I did I used a set of T pot cases all black and brand new old stock with 1127 crank 1216 pistons six speed gearbox .
  3. cregnybaa

    HPF1

    The gearbox output shaft and swingarm pin does not appear to be on a level plane ?. will this not cause problems.
  4. Andy Mcphearsons bike did go really well but recently had head done by well known specialist , just as head work can give it more power it can also take it away id start there if I was you.
  5. Michael Dunlop's mega expensive oil cooled XR69 goes through the Sulby speed trap at 171 ish mph and that bike would want for nothing.
  6. Just one question are these components made in china ?.
  7. AMA superbikes were reduced to 750cc from 1983 onwards.
  8. Did the Americans actually have the 1100 in 1986??.
  9. Ok thought it might be one of spikes. thanks.
  10. just wondering who did you get the fairing from, thanks Geoff.
  11. 2010 classic superbike podium my 750 cost me just over £1100 to build.
  12. After competing at the manx gp on and off but more on than off for 30 yrs I made the podium in 2010, it was at this point that I decided that it was time for me to stop racing the TT course but that didn't mean my bikes had to stop. I am now getting ready for another season of racing 2018 will be my 41st season I will do some short circuits to get the bike working ok for my good friend Dennis Booth to ride again at the pre TT and the classic TT. we would like to do the spa thing but struggle to find any regs.
  13. At the end of 6 laps wash the flies off it would go again.
  14. The start of 226 miles 6 laps of the ultimate.
×
×
  • Create New...