clivegto Posted October 13 Posted October 13 So this weekend I took the Harris to Stafford bike show with the Oldsckoolsuzuki Crew 4 Quote
imago Posted October 16 Posted October 16 On 10/13/2024 at 8:51 PM, clivegto said: So this weekend I took the Harris to Stafford bike show with the Oldsckoolsuzuki Crew Graham's absolutely hanging out of his arse. 3 Quote
clivegto Posted December 2 Posted December 2 (edited) 2 seasons riding the Harris and taking it to a few shows with the Oldsckoolsuzuki Crew now so thought it was time for a few little winter upgrades. First on the list was the wheels which are a standard gsxr1000 bronze in satin from new witj a few scratches which had been bugging me. Took the wheels out last week popped the tyres n discs off then removed the cast lettering from the spokes. Dropped them of on Friday at RAW coatings near York who to my surprise rang me up today to say they were ready so of I went to pick them up. Am well chuffed with the finish and only 48 quids per wheel. Edited December 2 by clivegto 5 Quote
clivegto Posted December 2 Posted December 2 3 minutes ago, Wee Man said: Thats a decent price for wheels. The finish is fantastic as well bud. 1 Quote
jonny1bump Posted December 2 Posted December 2 Getting the wheels super smooth is quite time consuming job. Quote
clivegto Posted December 3 Posted December 3 Second thing that had been bugging me was the anodising fading on the front brake reservoir and the clutch one too. I ordered a pair of AEM factory titanium integrated reservoirs to fit the Brembo RCS. Bit pricey but there lovely . I'v also ordered a pair of Metzler roadtec SE01's for the wheels as well. 4 Quote
Allspeeds Posted December 4 Posted December 4 1 hour ago, clivegto said: Tyres arrived I just fitted the latest 22 years matured Metz MEZ1s back on Clive Quote
clivegto Posted December 4 Posted December 4 3 minutes ago, Allspeeds said: I just fitted the latest 22 years matured Metz MEZ1s back on Clive Yea but I bet it won't be long before there's a set of Dymags sat in your Harris with fresh rubber mounted on them. Quote
clivegto Posted December 10 Posted December 10 Christmas has definitely come early for the Harris . Brembo Gp4-Rs calipers arrived today as well as the light weight rear disc I'd ordered 4 Quote
clivegto Posted December 10 Posted December 10 Fitted the back disc then fitted the wheels back into the bike. Tried the new calipers on for size and it looks like I need to make some spacers twice the size I had for the R1 calipers. 4 Quote
Allspeeds Posted December 11 Posted December 11 1 hour ago, Wagola said: five alive !! I see it Quote
dupersunc Posted December 12 Posted December 12 11 hours ago, Wagola said: five alive !! Pads are mixed up. larger bit of friction material should be on the trailing piston. 1 Quote
clivegto Posted December 12 Posted December 12 5 hours ago, dupersunc said: Pads are mixed up. larger bit of friction material should be on the trailing piston. You learn something new every day, Thanks. That's how they were fitted when they arrived. Quote
dupersunc Posted December 12 Posted December 12 46 minutes ago, clivegto said: You learn something new every day, Thanks. That's how they were fitted when they arrived. It's so the pad doesn't wear tapered. the trailing pad material runs hotter so wears more quickly, which is why you normally have different size pistons on multi piston calipers. Brembo either got their piston sizes wrong, or more likely realised the calipers would be cheaper to produce with one size piston and off set the pad material instead. 2 Quote
clivegto Posted December 12 Posted December 12 Well that's a bit bizarre there isn't a set of pads between all 4 there all the same Quote
dupersunc Posted December 12 Posted December 12 26 minutes ago, clivegto said: Well that's a bit bizarre there isn't a set of pads between all 4 there all the same Genuine Brembo pads? Quote
clivegto Posted December 12 Posted December 12 10 minutes ago, dupersunc said: Genuine Brembo pads? Well it says Brembo on them. 1 Quote
dupersunc Posted December 12 Posted December 12 1 hour ago, clivegto said: Well it says Brembo on them. How odd. Quote
clivegto Posted December 12 Posted December 12 44 minutes ago, dupersunc said: How odd. The SBS ones are one piece. Quote
clivegto Posted December 13 Posted December 13 So I messaged the seller about the pads and they say that's how they come from brembo even the 3 grand one's are the same. Quote
imago Posted December 13 Posted December 13 (edited) It's nothing more than supposition, but maybe it's an update? Reversed on the outer side of the calliper for balance as that would get more air flow and therefore run cooler than the inner? So that way it would keep both pads at the same temp for balanced wear and braking. Edited December 13 by imago Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.