yann7/11r Posted April 24, 2016 Author Share Posted April 24, 2016 Finally find an opportunity to have a painted front fairing. Some friends from Club11R section bring it to me at the Paul Ricard racetrack meeting. I decided to mount the bike with a complete fairing, i has for years. Made some modifications on the dashboard. Need paint retouch everywhere... 13 Quote Link to comment
Oilyspanner Posted April 25, 2016 Share Posted April 25, 2016 Love it Yann ! - I remember going to 24 heures du Mans a decade ago and was amazed by just how popular the oil cooled GSXRs were, absolutely 1000s at the campsite, there was an area that was just old GSXRs . . . happy days ! 1 Quote Link to comment
caferacerdan Posted April 25, 2016 Share Posted April 25, 2016 that looks awesome! Quote Link to comment
Big-Daddy Posted April 25, 2016 Share Posted April 25, 2016 Why did i sell My old gsxr Quote Link to comment
markfoggy Posted April 28, 2016 Share Posted April 28, 2016 Yan will know the relevance of the hose wrapped around the exhaust can, even of he didn't use it here. It's an old Endurance trick. You wrap that hose around filled with a couple of turns of fencing wire and the trist the free ends like lockwire and tie them onto the subframe somewhere. In an off where the exhaust hanger gets wankered, at least you have something suppoting the exhaust while the bike comes back for a repair. Can be an engine saver. I would explaain that bit, but it is long winded. 1 Quote Link to comment
yann7/11r Posted April 29, 2016 Author Share Posted April 29, 2016 Nice old endurance trick, markfoggy ! Thanks for sharing your experience. The renaissance from a championship with a "classic" category give us the occasion to have a close see to all that stuff. Lot of trick to see effectively...and the préparation level is just... indescribable !!! Quote Link to comment
yann7/11r Posted November 1, 2016 Author Share Posted November 1, 2016 Autumn comes gently and dirty/slippery roads also !!! Time to take a few picture before storing for the winter period. 7 Quote Link to comment
yann7/11r Posted August 19, 2017 Author Share Posted August 19, 2017 Hi to all OSS girls & boys. Since a long time,I've keeped in mind improve the braking power from my Slabby. I've passed a part of Winter trying to make work a pair of sixpot Béringer caliper...but with an unadapted master cylinder...no chance. So i change the plan and buy some bargain part from "a Prilia" bike. To mount this stuff, i've done some aloominium brackets (all laser cut with 2 hands a driller & a metal saw...) 8 Quote Link to comment
yann7/11r Posted August 20, 2017 Author Share Posted August 20, 2017 From there, the installation is easy. The Look is a little bit massive,but it's was a choice at the begining because i've opted for some FHC screws and need to make a "counterbore" (don't know if it's a exact term ?) for a correct mounting. I've buy this special tool and i'm waiting for it. Please...don't pay to much attention to the screws in place. Works, but...It's provisional. Was the only ones under the hands. 5 Quote Link to comment
yann7/11r Posted October 7, 2017 Author Share Posted October 7, 2017 Cause i know, you Oss Guys&Girls like pics... A little ride with some friends(good taste...the friends) 9 Quote Link to comment
yann7/11r Posted February 20, 2019 Author Share Posted February 20, 2019 This is how it look this time... But some cosmetic works are programmed. 4 Quote Link to comment
Swiss Toni Posted February 20, 2019 Share Posted February 20, 2019 Nice, tidy looking bike! Brakes turn out ok? Quote Link to comment
yann7/11r Posted February 20, 2019 Author Share Posted February 20, 2019 Brakes are much powerfull ! Even a little too harsh on the road. Quote Link to comment
manden Posted February 20, 2019 Share Posted February 20, 2019 7 hours ago, yann7/11r said: This is how it look this time... But some cosmetic works are programmed. is a fork from a watercooled? Quote Link to comment
yann7/11r Posted February 20, 2019 Author Share Posted February 20, 2019 Yeah. GsxR 1300. Quote Link to comment
manden Posted February 20, 2019 Share Posted February 20, 2019 1 hour ago, yann7/11r said: Yeah. GsxR 1300. Nice. did it bolt directly in the slingshot tees? Quote Link to comment
yann7/11r Posted February 20, 2019 Author Share Posted February 20, 2019 Nope. Complet 98 GsxR 1300 fork with specific bearings for Slabby frame. Quote Link to comment
slabbyfaceddean Posted July 8, 2019 Share Posted July 8, 2019 what bearings did you use in the end for the Busa Forks Quote Link to comment
yann7/11r Posted July 9, 2019 Author Share Posted July 9, 2019 16 hours ago, slabbyfaceddean said: what bearings did you use in the end for the Busa Forks This type : Quote Link to comment
slabbyfaceddean Posted July 10, 2019 Share Posted July 10, 2019 On 3/10/2016 at 5:48 AM, yann7/11r said: And because i always wanted a modified swingarm...but no one here, in France was selling something like that anymore. And if it was the case...at what price ? I opted for another self made realisation. what swingarm is that ? please Quote Link to comment
yann7/11r Posted July 10, 2019 Author Share Posted July 10, 2019 1 hour ago, Gammaboy said: 92-95 Fireblade @Gammaboy This one is 92-93 (sc29) but i think you can take a 95 with no trouble. Quote Link to comment
ElVikingoTropical Posted July 10, 2019 Share Posted July 10, 2019 Great build, Very inspiring for my own build! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.