clivegto Posted June 17 Author Posted June 17 1 minute ago, wraith said: Very nice It's a work of art in its own right to be fair. Am well chuffed to gete oily hands on it . Quote
wraith Posted June 17 Posted June 17 4 minutes ago, clivegto said: It's a work of art in its own right to be fair. Am well chuffed to gete oily hands on it . So, it's going on the wall not on the bike Quote
clivegto Posted June 17 Author Posted June 17 9 minutes ago, wraith said: So, it's going on the wall not on the bike Plan is to fit it then put it on the wall when it's Turbo time 1 Quote
clivegto Posted June 20 Author Posted June 20 Still collecting bitz heavy duty clutch springs, Ohlins Shock and a seat hump . 5 Quote
Sam-Jaffa Posted July 2 Posted July 2 On 6/17/2024 at 5:02 PM, clivegto said: In other news I picked this Onishi heat magic full titanium hand bent in Japan exhaust system today after a 4 1/2 hour round drive. It looks ace and weighs less than a packet of smokes . God damn, they're a bit lovely ain't they Quote
clivegto Posted July 2 Author Posted July 2 36 minutes ago, Sam-Jaffa said: God damn, they're a bit lovely ain't they Super dooper they are and weigh less than a pint of beer . Quote
clivegto Posted July 6 Author Posted July 6 (edited) Picked this blade seat unit up at Rufforth auto jumble today with the thought of perhaps fitting it to the busa. Edited July 6 by clivegto 1 Quote
wraith Posted July 6 Posted July 6 11 minutes ago, TonyGee said: anything is better looking than the busa arse end Can't agree with you any more, the hayabusa is a good bike but bloody ugly 3 Quote
wraith Posted July 6 Posted July 6 2 hours ago, clivegto said: Yea ugly as sin but fooking fast as fook Can't argue with that one 1 Quote
clivegto Posted July 6 Author Posted July 6 13 minutes ago, wraith said: Can't argue with that one It'll have to go on a diet to loose a few pounds to make it a bit nimbleer in the corners I recon. Quote
TonyGee Posted July 6 Posted July 6 3 hours ago, clivegto said: Yea ugly as sin but fooking fast as fook they are a fecking fast bike Quote
Upshotknothole Posted July 6 Posted July 6 1 hour ago, clivegto said: It'll have to go on a diet to loose a few pounds to make it a bit nimbleer in the corners I recon. Out of curiosity, where are the main places these bikes can lose weight? Wheels, suspension? Quote
clivegto Posted July 6 Author Posted July 6 5 minutes ago, Upshotknothole said: Out of curiosity, where are the main places these bikes can lose weight? Wheels, suspension? Every where but yes the wheels are very heavy compared with modern stuff. 1 Quote
wraith Posted July 7 Posted July 7 Will a gsxr1000 swingarm be any shorter than a bussa? May help in going round the corners. Quote
Svsam Posted July 7 Posted July 7 22 hours ago, clivegto said: Every where but yes the wheels are very heavy compared with modern stuff. I’m pretty sure you can make 675 wheels fit without to much trouble. The chap I had mine off had a set to fit but I never had em. -on a separate not I’m selling a 675 looking forward to seeing this one come together Clive…well, apart and back together! 1 Quote
clivegto Posted July 7 Author Posted July 7 (edited) 1 hour ago, Svsam said: I’m pretty sure you can make 675 wheels fit without to much trouble. The chap I had mine off had a set to fit but I never had em. -on a separate not I’m selling a 675 looking forward to seeing this one come together Clive…well, apart and back together! Cheers mate, bit of a new learning curve for me busa stuff. Edited July 7 by clivegto Quote
kja.busa Posted July 9 Posted July 9 On 7/6/2024 at 7:37 PM, clivegto said: It'll have to go on a diet to loose a few pounds to make it a bit nimbleer in the corners I recon. 220mm disc and matching caliper bracket on the rear, from either a TL or an Srad. 1 Quote
baldrick Posted July 9 Posted July 9 i fitted r-dung (R1) wheels to mine. they are lighter and, more importantl, they look miles better, especially in white 1 Quote
Joseph Posted July 13 Posted July 13 On 6/20/2024 at 7:29 PM, clivegto said: Still collecting bitz heavy duty clutch springs . Hey if they're not already in the engine, would you mind measuring them (L + OD) ? I'm guessing that the GSX 1400 shares the same spring dimensions and i need some really heavy duty ones so maybe a set of Busa ones will work Quote
clivegto Posted July 13 Author Posted July 13 (edited) 4 hours ago, Joseph said: Hey if they're not already in the engine, would you mind measuring them (L + OD) ? I'm guessing that the GSX 1400 shares the same spring dimensions and i need some really heavy duty ones so maybe a set of Busa ones will work 30x18.5x2.4mm approximately Edited July 13 by clivegto 1 Quote
Joseph Posted July 13 Posted July 13 3 hours ago, clivegto said: 30x18.5x2.4mm approximately Confirmed identical, so that means that along with the gearbox the whole clutch on the 1400 is from the Busa 1 Quote
clivegto Posted July 17 Author Posted July 17 Old New battery went flat and wouldn't charge back up after leaving the ignition on when it ran out of fuel on tick over. Bought agell one like I see on Ross's at Cadwell Park. Too old one off left it for a couple of day's then thought I'll just try the smart charger one more time a d low nn behold after 24 hours it pumped up to full power again. Also made a interference pipe to fit the an 6 fuel takeoff from the tank to stop any sludge in the bottom of the tank getting into the fuel flow. Also found eer bottle tops still in there 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.