Sam-Jaffa

oooooft

cheers for that, unfortunately they're still a narrow wheel looks like im back to the drawing board haha

Looks like it's gonna be expensive

We all know the iconic pentagram wheel on the old Suzukis BUT does anyone know of a 17x 5.5 wheel that has the same spoke design? Probably a long shot but worth an ask

OOOOOH

afternoon everyone! dont suppose anyone has the swinger pivot width for an 81 gs850 would they please? havent got the bike accessible to me at the moment and hoping someone has it buried in their head ta muchly

Aaaah cock!!! Why couldn't I see that Thanks dude, it's been a long day

I'm having issues my starter clutch is buggered and need to replace, problem is I can't find the correct size puller for the sodding thing, I bought this one https://gbmotorcycleproducts.com/suzuki-rotor-puller-tool-part-no-09930-34970/ as it seemed to be right but its too small, after measuring the SC seems to be 42mm but I can't find something that crosses over properly, anyone know of one that'll do the trick please doing my swede in now

top weekend guys!! was great to see old faces and new

Ive already booked the time off

I've got one in mine, it is attached to the seat unit not the frame though, I can try and get pics if you like?

I'll bring the kettle!

I should start taking more photos but we had a good selection this year!!

@davecara to the rescue, cheers bud!

Evening chaps and chapesses. I'm looking at fitting a Slabby taillight to the tail unit I've got but i need to ensure its going to actually fit unlike the one I've already bought...... If someone would be awesome enough to get some dimensions off theirs so I can check what available space i have on the seat unit that'd be great!!

Well that's the job jobbed, thanks to everyone who chipped in and helped and thanks to @Jaydeefor that spec sheet, worked a treat, must admit, having to ride it has rekindled my hatred for trikes but also my love for 8v air-cooled, so a win-lose situation

What an absolute dude!! Cheers matey, that couldn't be anyore useful 25 unredeemable OSS points to you sir!

Found the seal size, looks like they're gs1000 which makes life easier, looks like @Swiss Toni wins some totally unredeemable OSS points, just need to consult my autodata book for oil weight and amount, psi in the forks then we're good......unless someone has a gs1000 Haynes handy and fancies having a flick through please

also, iirc the final ratio of the 750 and the 1100 are damned near the same so as above, unless you like changing gear alot more stick to the 5 speed

im heading back over to his after work to measure the forks again and see if i can spy a measurement on the seal, why cant life be easy

Looks like there are a few options for the 37mm forks.......damn, need to go back and take an inner measurement.....why can't things be simple

Evening chaps (and chapesses) I need to supply and fit a set of fork seals to my friends GS750G After scouring the interwebs I've found that it may have a different set of GS forks ( these are bigger at 37mm) Would anyone here be able to ID them for me please so I can get the right seals Cheers in advance!

I wasn't sure if any would do as with the heat and the petrol fumes thought they may fail

Sorting some B12 carbs out for a fella I know, he's had his fingers in them and I've found that he's lost the 4 O-rings that go under the carb top vacuum points, I've found them on for £5.50 each but think he'll soil himself when I tell him, do we know anywhere that may do these cheaper? Cheers (Number 15)