busa ash Posted November 9, 2015 Share Posted November 9, 2015 help / info required please Quote Link to comment
Buddy Posted November 9, 2015 Share Posted November 9, 2015 I've fitted a dot head on a bandit before, what u needing to know? Quote Link to comment
SiBag Posted November 9, 2015 Share Posted November 9, 2015 Bolt it on, nuf said.When I did this I used GSXR 1100 K cams and slotted the bandit cam sprockets. Then dialled them in. 1 Quote Link to comment
fatblokeonbandit Posted November 9, 2015 Share Posted November 9, 2015 Ive done 2, both times used 750 j/k cams and heads with standard bandit cam wheels and off they went.. 133 rwhp last time, rev like fek, fun fun fun Quote Link to comment
clivegto Posted November 9, 2015 Share Posted November 9, 2015 I have one, as said just bolts on use b12 cam sprockets in your case my one is on a slabby 1052.The head on my one has been flowed as well never had it on a dyno but it revs high and goes like shit off a stick. 1 Quote Link to comment
busa ash Posted November 10, 2015 Author Share Posted November 10, 2015 so teapot dot head and cams with bandit cam wheels , and thats it on a bandit 1200 motor . i have the engine and a bloke wants too buy it i just want him too have the right info 1 Quote Link to comment
370steve Posted November 10, 2015 Share Posted November 10, 2015 Ash, is that Dave, my mate? when is he picking it up? Quote Link to comment
SiBag Posted November 10, 2015 Share Posted November 10, 2015 Teapot cams are a bit soft. So I wouldn't use them.Stock bandit cams maybe better.Or preferably 750 J/K or 1100 k cams. 1 Quote Link to comment
busa ash Posted November 11, 2015 Author Share Posted November 11, 2015 Ash, is that Dave, my mate? when is he picking it up?no steve he has never contacted me this is a guy from F Book 1 Quote Link to comment
markfoggy Posted November 13, 2015 Share Posted November 13, 2015 Does the Dot head work just as well with an over-bored motor, or does that chamber shape/squish get a bit marginal as the bore goes out? Quote Link to comment
wraith Posted March 31, 2016 Share Posted March 31, 2016 (edited) Dose anybody know what the dot head on a b12 takes the compression ratio up to? Edited March 31, 2016 by wraith Quote Link to comment
clivegto Posted March 31, 2016 Share Posted March 31, 2016 About 1 1/2 to 2 points up if I remember correctly. Quote Link to comment
Fula28 Posted April 1, 2016 Share Posted April 1, 2016 I've done a couple, last one on b12 was 750-j,k head with same cams b-12 cam sprockets, 4-1 system and 36mm carbs, made 130bhp at wheel, But also finished with uppteron flow job skimmed o,.o05 " , comp was 12:5.1 and 38mm, carbs 4-1 system 84lbs torque, and 147bhp .1157cc and one OSS no bullshit award lol. well worth the effort but as Si says gsxf cams too soft, you need gsxr-750 j.k or 1100, 2 Quote Link to comment
Boogieman Posted April 1, 2016 Share Posted April 1, 2016 Can I do the same to an 1127 shim headed motor? Cheers Quote Link to comment
Fula28 Posted April 1, 2016 Share Posted April 1, 2016 Not sure, head can be swapped from shims to locknut if you have spare head parts . Only carried out this on older heads. Quote Link to comment
kokolis Posted April 2, 2016 Share Posted April 2, 2016 22 hours ago, Boogieman said: Can I do the same to an 1127 shim headed motor? Cheers Yes, but you have to use the head as a complete set Quote Link to comment
Boogieman Posted April 2, 2016 Share Posted April 2, 2016 4 hours ago, kokolis said: Yes, but you have to use the head as a complete set Cheers Quote Link to comment
Sandman Posted April 4, 2016 Share Posted April 4, 2016 No problem to fit a 750-j,k head on 1127 shim headed motor. Quote Link to comment
Prossen Posted November 28, 2020 Share Posted November 28, 2020 Hi. I have a gsxr 1100r 91. Can I fit a b1200 camhead mk1, and use the gsxr cam from a 90 (and earlier on) ? Is there hp loss in using a 1200 head? Quote Link to comment
wraith Posted November 28, 2020 Share Posted November 28, 2020 37 minutes ago, Prossen said: Hi. I have a gsxr 1100r 91. Can I fit a b1200 camhead mk1, and use the gsxr cam from a 90 (and earlier on) ? Is there hp loss in using a 1200 head? Always nice to introduce yourself in the general section before jumping in and asking questions 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.