clivegto Posted August 24, 2021 Share Posted August 24, 2021 Fantastic, so it's home again by the looks of it. Quote Link to comment
GeorgeEI7KO Posted September 9, 2021 Share Posted September 9, 2021 savage machine Quote Link to comment
Allspeeds Posted September 30, 2021 Author Share Posted September 30, 2021 Last little push before winter months subframe made to accommodate RGV seat everything fitted to work as it should seat properly hooks I n at front and rear seat uses OEM seat lock etc battery box will go under seat but we need to make exhaust first then that will dictate what room we have. large oil cooler mounted nice 410 wide fits frame better than gsxr sized ones at 235. Headlights and head cooler mount with space left to mount a dash once I decide on what I like thinking motec maybe? next decision is how to final trim panels near frame???? 7 Quote Link to comment
Gixer1460 Posted September 30, 2021 Share Posted September 30, 2021 Might be tricky running a Motec dash without a Motec ECU to drive it ? Lose the tractor carb, fit a big throttle body, add some big injectors into the plenum then fit a Motec ECU - welcome to the 21st century LOL! Quote Link to comment
Allspeeds Posted October 1, 2021 Author Share Posted October 1, 2021 11 hours ago, Gixer1460 said: Might be tricky running a Motec dash without a Motec ECU to drive it ? Lose the tractor carb, fit a big throttle body, add some big injectors into the plenum then fit a Motec ECU - welcome to the 21st Quote Link to comment
Allspeeds Posted October 1, 2021 Author Share Posted October 1, 2021 Just now, Allspeeds said: 11 hours ago, Gixer1460 said: Might be tricky running a Motec dash without a Motec ECU to drive it ? Lose the tractor carb, fit a big throttle body, add some big injectors into the plenum then fit a Motec ECU - welcome to the 21st Ran a motec dash on a 600 bsb superstocker in 2012 so it must be possible Quote Link to comment
Gixer1460 Posted October 1, 2021 Share Posted October 1, 2021 3 hours ago, Allspeeds said: Ran a motec dash on a 600 bsb superstocker in 2012 so it must be possible I thought they relied on the CAN bus for info input - normally from the ECU. Maybe the 600 had that functionality? Quote Link to comment
MeanBean49 Posted October 1, 2021 Share Posted October 1, 2021 Looks cool mate, shame to cover that subframe up Quote Link to comment
Allspeeds Posted October 1, 2021 Author Share Posted October 1, 2021 17 minutes ago, MeanBean49 said: Looks cool mate, shame to cover that subframe up Yah I thought that nothing is welded to main frame either only to the bolt on loop Quote Link to comment
Allspeeds Posted October 1, 2021 Author Share Posted October 1, 2021 Cut the panels this morning 3 Quote Link to comment
Wagola Posted October 1, 2021 Share Posted October 1, 2021 1 hour ago, Allspeeds said: Cut the panels this morning One seat too many !! Quote Link to comment
Allspeeds Posted October 1, 2021 Author Share Posted October 1, 2021 1 hour ago, Wagola said: One seat too many !! If I could find a seat cowl I’ll be changing it like rocking hourse shit but it works well for fast access to battery Quote Link to comment
MeanBean49 Posted October 1, 2021 Share Posted October 1, 2021 2 minutes ago, Allspeeds said: If I could find a seat cowl I’ll be changing it like rocking hourse shit but it works well for fast access to battery I may have a genuine one buiried somewhere, yours if I can find it Quote Link to comment
Allspeeds Posted October 1, 2021 Author Share Posted October 1, 2021 1 hour ago, MeanBean49 said: I may have a genuine one buiried somewhere, yours if I can find it 1 Quote Link to comment
busa ash Posted December 23, 2021 Share Posted December 23, 2021 Saw this on monday when i dropped of my turbo gsx11p0e for some fueling help from nick . I rember following robs progress with this bike . I am.sure you going to do a great job of making this bike your own build now nick Quote Link to comment
Kamikaze Posted December 25, 2021 Share Posted December 25, 2021 looking great, the tail and lines of the bike work well... Quote Link to comment
Blower1 Posted December 25, 2021 Share Posted December 25, 2021 On 9/30/2021 at 8:33 PM, Allspeeds said: Last little push before winter months subframe made to accommodate RGV seat everything fitted to work as it should seat properly hooks I n at front and rear seat uses OEM seat lock etc battery box will go under seat but we need to make exhaust first then that will dictate what room we have. large oil cooler mounted nice 410 wide fits frame better than gsxr sized ones at 235. Headlights and head cooler mount with space left to mount a dash once I decide on what I like thinking motec maybe? next decision is how to final trim panels near frame???? If you moving the headlights below the oil cooler it would look much better. Now it´s like ET standing in the top of the cooler. 1 Quote Link to comment
waterwagen Posted January 27, 2022 Share Posted January 27, 2022 This is going to be killer when its complete! Quote Link to comment
Allspeeds Posted July 10, 2022 Author Share Posted July 10, 2022 Might have to part with this to fund a race truck Quote Link to comment
Allspeeds Posted July 11, 2022 Author Share Posted July 11, 2022 Yah I don’t want to nor will it be cheap but I’m at a cross roads I want to have a good crack at racing this next few years and the wife and kids are onboard so I need something to accommodate them aswell so I may need to equity out the spondon I think 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.