Jump to content

Simbec1863

Winged Hammer
 View Profile  See their activity

  • Posts

    1,714

  • Joined

  • Last visited

 Content Type 

Everything posted by Simbec1863

  1. Simbec1863
    Suzuki still do them as well as here https://www.cmsnl.com/suzuki-gsx1100e-1981-x-general-export-e01_model13743/partslist/FIG-24.html#results
  2. Simbec1863
    I'll be there just need to survive a track day at Donny tomorrow on the non Suzook
  3. Simbec1863
    Just about fitted the stem into my diy fizzy bath and got the crap off it ready to fit new races and bearings and give it a coat of silver paint before refitting
  4. Simbec1863
    Cleaned up the cast part of the frame with a soft wire brush and some WD40
  5. Simbec1863
    Steering stem out and was expecting knackered bearings with zero grease but was pleasantly surprised
  6. Simbec1863
    P valve looked fooked but managed to get it off dropped in the fizzy bath and hey presto looks like new again
  7. Simbec1863
    Manky brakes ready for the skip
  8. Simbec1863
    Well in between rain today thought I should carry on the strip down and clean on the RGV,dragged the frame out the garage and stuck on the stand while I stripped the front end. Got the old brakes and lines off with a bit of swearing can't believe that someone previously tightened the banjo bolts on the calipers and rounded the bolt heads off,they'll be going in the bin as I've got new lines and bolts ready to fit.
  9. Simbec1863
    Welcome to the madhouse
  10. Simbec1863
    Welcome back great bikes I had forgotten how suzuki had lost the plot with the shell suit colour schemes in the 90's. Great platforms for a good project and 2 nice tidy examples you have there.
  11. Simbec1863

    Harris

    Simbec1863 replied to Bondy's topic in Trick Frames

    Lovely bike and being used as intended,respect for riding to the TT on the race foam and bubble wrap
  12. Simbec1863
    Did somebody say beer....
  13. Simbec1863
    Plan to go Sunday to watch race bikes and parades
  14. Simbec1863
    Belly pan off for a quick clean and some measuring for a fellow OSS. Looks ok might leave it off for a while.
  15. Simbec1863
    30 miles in the sun today quick clean now off to the boozer for a swift pint
  16. Simbec1863
    Off out after sealing the JMC to save me polishing it every week quick 30 mile blast then back home and swap for the ET to take its turn...never take for granted I'm very lucky to have both
  17. Simbec1863
    On level ground off the side stand from the point requested no weight on the suspension it's 255mm
  18. Simbec1863
    I haven't forgot didn't get home until today will sort in the morning for you
  19. Simbec1863
    You need a minimum 50 posts then you can ask @minx nicely and you should be able to buy one if they are still available
  20. Simbec1863
    Looking good could look even better with white wheelsalthough my mate had one and his wheels were dayglow orange
  21. Simbec1863
    http://lpmreplicaparts.com/suzuki/GSXKatana/fairing.html Think this is who you are thinking of haven't used myself but know people that have believe they are decent quality and fit ,not sure if they still do ET parts though
  22. Simbec1863
    The black ones are in the shed as spares
  23. Simbec1863
    Will sort it when I'm back home Friday mate
  24. Simbec1863
    I'm still on standby Rick mine is on stock wheels only change from standard is jmc swing arm
  25. Simbec1863
    Still time yet I'm on standby if you don't get the info
×
×
  • Create New...