Guest YoshiJohnny Posted January 12, 2017 Posted January 12, 2017 Knowing how we like pics.. before and after slabby motor...grubby 30 year old turned cleaner than a nuns whites... Quote
MrS819 Posted January 16, 2017 Posted January 16, 2017 What preparation did you have to do? What paint did you use? Quote
fatblokeonbandit Posted January 17, 2017 Posted January 17, 2017 That's so clean you could eat a pasty off of it Do I need to bring some to Donnington for you and Mrs Yoshi.??? Quote
Guest YoshiJohnny Posted January 17, 2017 Posted January 17, 2017 8 hours ago, fatblokeonbandit said: That's so clean you could eat a pasty off of it Do I need to bring some to Donnington for you and Mrs Yoshi.??? OMG.... yes please... Quote
Guest YoshiJohnny Posted January 17, 2017 Posted January 17, 2017 On 16/01/2017 at 11:29 AM, MrS819 said: What preparation did you have to do? What paint did you use? Prep.... taken to Ribble Technologies for dipping and stripping Taken to the wonderful Mr Kent who painted it with acid wash etch primer then 2 pack in a colour matched to original paint on the inside of the sump Quote
Guest YoshiJohnny Posted July 24, 2017 Posted July 24, 2017 Another one nearly finished... been a scrapheap challenge this one but it's close to being done Quote
richyrich Posted July 24, 2017 Posted July 24, 2017 Ive got a couple of silly questions, Does the thing have to be in bits to Get dipped, stripped, acid wash primered and two packed? If they do it whole does the blanking off have to be way more pro than tapeing rags in the holes? Is it many hundreds of beer tokens? Thankyou Quote
Guest YoshiJohnny Posted July 24, 2017 Posted July 24, 2017 4 minutes ago, richyrich said: Ive got a couple of silly questions, Does the thing have to be in bits to Get dipped, stripped, acid wash primered and two packed? If they do it whole does the blanking off have to be way more pro than tapeing rags in the holes? Is it many hundreds of beer tokens? Thankyou yes can't do it in one piece (gets full of chemicals) Ribble Technologies in Preston charge around £70 for dipping all the bits of a GSXR motor and I much prefer that process than blasting Quote
Guest YoshiJohnny Posted July 24, 2017 Posted July 24, 2017 1 hour ago, Rene EFE said: Are you building a B6? lol noooooooooooo it's a big bore 1127 motor Quote
Dezza Posted July 26, 2017 Posted July 26, 2017 Looks good. Are the case bolts dull stainless or has the stock plating been removed from the OEM bolts? Quote
Guest YoshiJohnny Posted July 26, 2017 Posted July 26, 2017 1 hour ago, Dezza said: Looks good. Are the case bolts dull stainless or has the stock plating been removed from the OEM bolts? stainless Quote
CockneyRick Posted July 27, 2017 Posted July 27, 2017 I'm sure Banoffee spotted a fleck of dust there Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.