jb Posted September 26, 2017 Author Posted September 26, 2017 (edited) thought i'd try some different old wheels that i found at the back of the garage.......they were meant to be going in another bike but fitted this one too well not to! Edited September 26, 2017 by jb 14 Quote
pigford Posted October 22, 2017 Posted October 22, 2017 (edited) Any updates Jon? Edited October 22, 2017 by pigford Quote
jb Posted October 23, 2017 Author Posted October 23, 2017 On 10/22/2017 at 8:30 AM, pigford said: Any updates Jon? she's getting there mate......not sure if she'll be ready for the Dragon but getting closer now..... the old oil cooler was leaking so i got a shiny new one from China and have cobbled up a mounting bracket, just waiting on a hose separator to arrive to finish the job. have been tiding up the electrics and without too much drama will re-locate most of the gubbins under the tail..... have also stripped all the paint off the tank, was thinking of just leaving it brushed alloy but it has been lead filled in a number of places so i'm back to re-spraying it again.... 1 Quote
pigford Posted October 23, 2017 Posted October 23, 2017 Those Astralites really do look smart - never used to like them much........ but now 1 Quote
jb Posted January 6, 2018 Author Posted January 6, 2018 quick update time....... the tank is now finally fully stripped, it took ages which in hindsight would have been quicker to have chemically done......but wheres the fun in that lol have been chipping away at the electrics which i am now nearing completion, just need to decide what sort of ignition switch to fit and where to put it, hopefully i can get away without fitting indicators but will have to see as its on a Q plate. feel like it has turned a big corner today after getting some new, smaller front brake discs......now the front nissins all line up properly on the adapter brackets that a good friend gave me, have also sorted the rear brake with a re-built slingshot rear caliper and mildly adapted slabside torque arm......jobs a good un! 13 Quote
gsx Posted January 6, 2018 Posted January 6, 2018 Do like that especially the Astralites, mmm mucker Wayne's got a set in his shed, I wonder Quote
jb Posted March 21, 2018 Author Posted March 21, 2018 big thank you to mr jason for the TR750 seat unit.....keeping the OSS stylee 5 Quote
jb Posted May 1, 2018 Author Posted May 1, 2018 (edited) she's now up and running, will road test on the way to mot later this week.......with abit of luck..... will be fitting a bikini fairing at some point but no time to do a nice paint job yet.... booked in for the track day at Donington in a couple of weeks, am sure it will out perform my skills! Edited May 1, 2018 by jb 14 Quote
jb Posted May 1, 2018 Author Posted May 1, 2018 Have updated a couple of the old pictures on previous page, interesting to see the difference since I bought it Quote
Dezza Posted May 1, 2018 Posted May 1, 2018 This is a nice bike and a pretty unusual chassis. Do you still have the Spondon discs that were on it previously but now are not? Someone on here was looking for some a little while back as they were asking me if I knew of the whereabouts of any. 1 Quote
jb Posted May 2, 2018 Author Posted May 2, 2018 10 hours ago, Dezza said: This is a nice bike and a pretty unusual chassis. Do you still have the Spondon discs that were on it previously but now are not? Someone on here was looking for some a little while back as they were asking me if I knew of the whereabouts of any. Cheers dezza....yes I still have the Spondon discs although they are zxr fitment, same as some marvic wheels I have too (very slightly different bolt pcd to slingshot but same overall diameter) Quote
spondonturbo Posted May 2, 2018 Posted May 2, 2018 4 hours ago, jb said: Cheers dezza....yes I still have the Spondon discs although they are zxr fitment, same as some marvic wheels I have too (very slightly different bolt pcd to slingshot but same overall diameter) It was me that @Dezzawas talking about. Been looking for a while as my front wheel on my spondon is on a standard slingshot wheel and discs. The oly standard bits on the bike ! Have been looking for discs and a marvic 3 spoke for a while. Let me know if you decide to sell. Cheers to @Dezzafor the heads up 2 Quote
Allspeeds Posted October 21, 2018 Posted October 21, 2018 On 5/1/2018 at 2:59 PM, jb said: she's now up and running, will road test on the way to mot later this week.......with abit of luck..... will be fitting a bikini fairing at some point but no time to do a nice paint job yet.... booked in for the track day at Donington in a couple of weeks, am sure it will out perform my skills! Kool looking bike mate good work 2 Quote
clivegto Posted October 21, 2018 Posted October 21, 2018 (edited) @Allspeeds& @Stumpyit is for sale in the for sale section . Was tempted my self but am skint at the moment. Edited October 21, 2018 by clivegto 1 Quote
Askamaskinservice Posted October 21, 2018 Posted October 21, 2018 That's almost cruel, they can't see the sale section yet... 1 Quote
Stumpy Posted October 21, 2018 Posted October 21, 2018 cant see the for sale section yet, im getting there eventually Quote
Dezza Posted April 2, 2019 Posted April 2, 2019 Yep, keep it. You'll only regret selling sooner or later. PS, do you still have the rc30 seat unit? Quote
R1guy Posted April 2, 2019 Posted April 2, 2019 47 minutes ago, Dezza said: PS, do you still have the rc30 seat unit? 1 Quote
Kamikaze Posted April 11, 2019 Posted April 11, 2019 Don't sell it. That's a rare bike. Nice build too btw. 1 Quote
jb Posted April 12, 2019 Author Posted April 12, 2019 cheers it still needs more 'proving' and is me only bike on the road at present. will be mostly looking into suspension upgrades this year......after that it might be time to shove in the old gs1000 motor..... 1 Quote
Allspeeds Posted April 22, 2019 Posted April 22, 2019 On 4/12/2019 at 8:20 AM, jb said: cheers it still needs more 'proving' and is me only bike on the road at present. will be mostly looking into suspension upgrades this year......after that it might be time to shove in the old gs1000 motor..... Don’t waist your time and money on others just ring Richard at Maxton he will sort it out forks and shock at sensible money for up to date cartridges and shocks for your old skool bikes mate you can even take your bike to him to set up if you wanted 1 Quote
.thumb.jpg.91aae126f663860c7d1df1ba11bc0ce9.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.