Allspeeds Posted November 1, 2021 Share Posted November 1, 2021 1100et for me Clive Quote Link to comment
clivegto Posted November 2, 2021 Author Share Posted November 2, 2021 Think I am going with the original one at the moment. Though it was a bit long so cut 85mm of the back, added 50mm foam to raise the seat hight (just for mock up). Plan is to fit the gsxr back light I got of Colin to it. 4 Quote Link to comment
clivegto Posted November 6, 2021 Author Share Posted November 6, 2021 Cut a bit more of seat unit. Like better now. 6 Quote Link to comment
Paulm Posted November 6, 2021 Share Posted November 6, 2021 M light unit and original seat unit for me Clive,gonna be a cool bike mate. Good to see ya again on Thursday. 1 Quote Link to comment
caferacerdan Posted November 7, 2021 Share Posted November 7, 2021 rg500 style like Steve Burns original monster! Quote Link to comment
Allspeeds Posted November 9, 2021 Share Posted November 9, 2021 That one I mentioned Clive…. 2 Quote Link to comment
clivegto Posted November 9, 2021 Author Share Posted November 9, 2021 1 minute ago, Allspeeds said: That one I mentioned Clive…. Cheers mate I found it. 1 Quote Link to comment
Stumpy Posted November 9, 2021 Share Posted November 9, 2021 (edited) 7 hours ago, clivegto said: Cheers mate I found it. I see this up CMC quite a bit, does look well in the flesh Edited November 9, 2021 by Stumpy 1 Quote Link to comment
clivegto Posted November 9, 2021 Author Share Posted November 9, 2021 Got some new old stock Spondon frame stickers in the post today. 4 Quote Link to comment
fatblokeonbandit Posted November 9, 2021 Share Posted November 9, 2021 8 hours ago, Allspeeds said: That one I mentioned Clive…. Bugger me that’s shiny 1 Quote Link to comment
Dezza Posted November 9, 2021 Share Posted November 9, 2021 1 hour ago, clivegto said: Got some new old stock Spondon frame stickers in the post today. I had a sheet of them done about 3 years back: 24 for 12 quid. I still have 22 left and no, it's not me flogging them for 7 quid a pop on eb@y Quote Link to comment
clivegto Posted November 9, 2021 Author Share Posted November 9, 2021 1 hour ago, Dezza said: I had a sheet of them done about 3 years back: 24 for 12 quid. I still have 22 left and no, it's not me flogging them for 7 quid a pop on eb@y Got them off a fella in tha Spondon owners club. 3 Quote Link to comment
spondonturbo Posted November 9, 2021 Share Posted November 9, 2021 Jesus Clive do you have some sort of seat fettish I thought I had a few seats stashed but thats some collection you have! on another note - good find :-) 2 Quote Link to comment
clivegto Posted November 9, 2021 Author Share Posted November 9, 2021 1 hour ago, spondonturbo said: Jesus Clive do you have some sort of seat fettish I thought I had a few seats stashed but thats some collection you have! on another note - good find :-) Thats nowt compared to me swinging arm collection 4 Quote Link to comment
clivegto Posted November 10, 2021 Author Share Posted November 10, 2021 Took the cobra headers off 1 exhaust bolt was missing 3 turned out alright and 4 sheared off. Offered up some b12 turbo headers with a TDO4L turbo, there's loads of room for a turbo setup compared to my Harris 4 Quote Link to comment
clivegto Posted November 10, 2021 Author Share Posted November 10, 2021 After a little research it would appear that 24 of these frames were made, 12 for Japanese engines and 12 for European engines. Quite interesting I thought well at least to me 2 Quote Link to comment
clivegto Posted November 12, 2021 Author Share Posted November 12, 2021 Had to try the draw through pipes on for size I have in my stash 1 Quote Link to comment
clivegto Posted November 12, 2021 Author Share Posted November 12, 2021 Early Mr Dunlop b12 headers with what might be a Chinese gt28. I like the look of this setup 4 Quote Link to comment
clivegto Posted November 12, 2021 Author Share Posted November 12, 2021 Turbo stash stuff. 3 Quote Link to comment
gsx Posted November 13, 2021 Share Posted November 13, 2021 So what is holding the engine in the frame apart from rear engine mounts ? ( may have just made myself look silly) Quote Link to comment
clivegto Posted November 13, 2021 Author Share Posted November 13, 2021 3 hours ago, gsx said: So what is holding the engine in the frame apart from rear engine mounts ? ( may have just made myself look silly) Like this. Seen some others like this as well. Quote Link to comment
clivegto Posted November 13, 2021 Author Share Posted November 13, 2021 @gsxyou can see the front engine mount better on this one Quote Link to comment
gsx Posted November 13, 2021 Share Posted November 13, 2021 Amazes me that two bolted on bits of tube work as well as the bike handles 1 Quote Link to comment
clivegto Posted November 13, 2021 Author Share Posted November 13, 2021 3 hours ago, gsx said: Amazes me that two bolted on bits of tube work as well as the bike handles They say they were really good handling bikes back then, I will be lucky enough to find out after a bit of fettling 6 Quote Link to comment
waterwagen Posted February 6, 2022 Share Posted February 6, 2022 On 10/24/2021 at 4:29 PM, kja.busa said: Damn, I should have guessed, I had first dibs if you didn't buy it. I was hoping you wouldn't turn up! Seems he told a few they had first dibs then Great bones for a love bike. The red one is sublime. Gotta be the ET tail piece and stubby seat FTW. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.