wraith Posted May 11, 2020 Share Posted May 11, 2020 I've not put this in projects as it's just a front end swap of bits I've been collecting when came up cheep. So, it's a real mix and match type of thing The bits are Sv650 (99-02) front wheel and discs. Rf600 forks, and mudguard brace. Rf600 bottom yoke. B6 wheel spindle, spacer, Speedo drive. B6 top yoke. B12 clock but with a b6 Speedo. B6 clutch perch. Gsxr600 k5-k6 front master cylinder. Tomorrow I will be fitting the gsxr1000k1 6 pots. So I don't know how the standard brakes would fit and when it arrives a rf600 front mudguard. Apart from making new lock stops it all went together very nicely. So tomorrow jobs, sort front brakes, sort wiring and put front indicators on job done 8 Quote Link to comment
wraith Posted May 12, 2020 Author Share Posted May 12, 2020 Didn't get the brakes done, but all the wiring is now done with new indicators. I will get better pics when brakes are on and the bike is out side. 9 Quote Link to comment
wraith Posted May 13, 2020 Author Share Posted May 13, 2020 Mock up plate for front brake caliper, then first test fit of the bracket 5 Quote Link to comment
Fazz711 Posted May 13, 2020 Share Posted May 13, 2020 Nice work as always bud 1 Quote Link to comment
80GS1000 Posted May 14, 2020 Share Posted May 14, 2020 Looks great. Nice bitsa on the front end. 1 Quote Link to comment
Darcy Posted May 20, 2020 Share Posted May 20, 2020 What a great looking bike. Well done. 1 Quote Link to comment
wraith Posted May 20, 2020 Author Share Posted May 20, 2020 Cheers all The way it's turned out it has been worth it, and can say it's a one off gs1000g fell lucky with the front mudguard colour as that's the standard rf600 colour and matches the rest of the bike colour Quote Link to comment
simesman Posted May 21, 2020 Share Posted May 21, 2020 What bars are you using, they look great? The width and bends are exactly what I am after for my GS1000. Tried a few now, but not happy yet. Quote Link to comment
wraith Posted May 21, 2020 Author Share Posted May 21, 2020 2 hours ago, simesman said: What bars are you using, they look great? The width and bends are exactly what I am after for my GS1000. Tried a few now, but not happy yet. The bars are Renthal 664 code but not forgetting the b6 yokes have a big rise on them as standard top of yoke to center of bar 55mm which make a big difference. Pic to follow for you Quote Link to comment
simesman Posted May 21, 2020 Share Posted May 21, 2020 Excellent, thank you. I will take a look at them. I did buy Renthals, but obviously not the right ones! 1 Quote Link to comment
wraith Posted May 21, 2020 Author Share Posted May 21, 2020 Yes, there are quite a lot of different sizes with Renthal. Quote Link to comment
fab Posted May 21, 2020 Share Posted May 21, 2020 finished up very nice, well done 1 Quote Link to comment
Neil-IOM Posted May 22, 2020 Share Posted May 22, 2020 What carbs do you have on there, looking good, a bit different from the usual stuff 1 Quote Link to comment
wraith Posted May 22, 2020 Author Share Posted May 22, 2020 B12 MK1 with b12 carb rubbers I like different from the usual stuff Quote Link to comment
johnr Posted May 29, 2020 Share Posted May 29, 2020 is that the revere swingarm? looks fucking awesome. id love to fit one of theem into a 650 shafty kat. 1 Quote Link to comment
wraith Posted May 29, 2020 Author Share Posted May 29, 2020 (edited) Yes it is Pm sent Edited May 29, 2020 by wraith 1 Quote Link to comment
Jmckechnie Posted September 6, 2022 Share Posted September 6, 2022 Nice work ! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.