Jump to content

fab

Members
  • Posts

    198
  • Joined

  • Last visited

Everything posted by fab

  1. fab

    GS1000 tank

    stunning bit of kit.
  2. have you got a picture of your carburetors?
  3. just put a small piece of flexible hose between the two.
  4. nice bike, lift the needle 1 clip and try it.
  5. I didn't say they were on the ends?
  6. I would check the 2 inner head bolt Orings first.
  7. have you checked for oil contamination?
  8. check fuses and battery voltage also check battery cables and make sure they are connected well.
  9. check your compression gauge on a good engine you have, at least you will know if its working ok
  10. fab

    Head Gasket

    have you measured both gaskets.
  11. thanks for that, I will contact our Suzuki importer and see how I go.
  12. I was just trying to confirm what "COLOUR" my bike was from the factory, not trying to get a paint code. cars in my country will have a vin plate with exterior colour , interior colour
  13. will a vin number tell you what color the bike was from the factory?
  14. fab

    Murrays Carbs.

    i have used his kit on a cx650 and it all worked well
  15. if you cannot find one i have made a spacer up out of a ice-cream lid and put it under the rubber
  16. do you have a clutch switch? if so check it or bypass it.
  17. i have a 750L and have the power jet carbs.
  18. thanks for setting me straight fellas,i will have to look a bit better so i can find some that will work.
  19. problem with most other quickshifter brands they dont do them for older bikes
  20. has anyone installed or tried a healtech quick shifter. they look quite different to the solenoid type, so not sure if they are worth it or not?
  21. in the utube video he doesn't undo the damper rod bolt at the bottom to change fork seals he just undoes the top which is how i will be going with it.
  22. great link, i just watched it and looks like i can do it without special tools so i will order the bushes and seals and do them.
  23. 1990L 750 slingshot i have fitted lots of rwu fork seals but i haven't ever done usd fork seals i read the manual and there only way is with special tools can it be done easier than in the manual or any tips or tricks to do it? i did a search but couldn't find exactly what i wanted
×
×
  • Create New...