New front end for gs1000

[wraith]

I've not put this in projects as it's just a front end swap  of bits I've been collecting when came up cheep.

So, it's a real mix and match type of thing 

The bits are

Sv650 (99-02) front wheel and discs.

Rf600 forks, and mudguard brace.

Rf600 bottom yoke.

B6 wheel spindle, spacer, Speedo drive.

B6 top yoke.

B12 clock but with a b6 Speedo.

B6 clutch perch.

Gsxr600 k5-k6 front master cylinder.

Tomorrow I will be fitting the gsxr1000k1 6 pots. So I don't know how the standard brakes would fit and when it arrives a rf600 front mudguard.

Apart from making new lock stops it all went together very nicely.

So tomorrow jobs, sort front brakes, sort wiring and put front indicators on  job done 

[wraith]

Didn't get the brakes done, but all the wiring is now done with new indicators.

 

 

I will get better pics when brakes are on and the bike is out side.

[Fazz711]

Looking good mate 

[wraith]

Mock up plate for front brake caliper, then first test fit of the bracket

 

[wraith]

Done 

[keith]

looks mean

[gs7_11]

Looks great! Nice work.

 

[Fazz711]

Nice work as always bud 

[80GS1000]

Looks great.  Nice bitsa on the front end.

[Darcy]

What a great looking bike. Well done. 

[wraith]

Cheers all 

The way it's turned out it has been worth it, and can say it's a one off gs1000g  fell lucky with the front mudguard colour as that's the standard rf600 colour and matches the rest of the bike colour 

[simesman]

What bars are you using, they look great? The width and bends are exactly what I am after for my GS1000. Tried a few now, but not happy yet.

[wraith]

2 hours ago, simesman said:

What bars are you using, they look great? The width and bends are exactly what I am after for my GS1000. Tried a few now, but not happy yet.

The bars are Renthal 664 code but not forgetting the b6 yokes have a big rise on them as standard top of yoke to center of bar 55mm which make a big difference.

Pic to follow for you 

[wraith]

[simesman]

Excellent, thank you. I will take a look at them. I did buy Renthals, but obviously not the right ones!

[wraith]

Yes, there are quite a lot of different sizes with Renthal.

[Bubba1135]

Looking good mate .

[fab]

finished up very nice, well done

[Neil-IOM]

What carbs do you have on there,  looking good, a bit different from the usual stuff

 

[wraith]

B12 MK1 with b12 carb rubbers 

I like different from the usual stuff 

[busa ash]

Looking good mate 

[johnr]

is that the revere swingarm? looks fucking awesome. id love to fit one of theem into a 650 shafty kat.

 

[wraith]

Yes it is

Pm sent 

Edited May 29, 2020 by wraith

[Jmckechnie]

Nice work !