Italianeze Technoloy

[yantosh]

dumbass of the day award (it was a week or two ago) 

 

I had it in my head that SV650 clutch covers and TL1000 clutch covers were the same, fuck knows where I got that notion, but they aint 

so I now have this.... just waiting on filler hole 

 

[yantosh]

so back to the drawing board .....

 

I now have this , also waiting for the filler hole 

 

 

[vizman]

Just happy little mistakes....

[Blubber]

3 hours ago, vizman said:

Just happy little mistakes....

Think you forgot these too

"Just add a little Vandyck Brown "and “This is happy place; little squirrels live here and play.”

[yantosh]

clutch cover looking bit diff from stock,  works for me 

 

 

finger prints are getting worn out too

 

 

ignore the Dyoo,cauti sticker ,  new livery not going on till it nearer  completion 

 

[yantosh]

i,ll put this here as proof of what i planned... if i,m going to fail i,ll do it spectacularly and with an audience 

 

rear header plan 

 

[yantosh]

bends for the tricky bit are ordered, but not here yet, so make a start on the curvy bit 

 

[yantosh]

stuck a wee tab on, easier than holdin it with one hand and trying to position the next bit 

 

 

sorted

 

 

clamp rings made

 

fits fine 

 

 

made a filler cap 

 

damper going no place now 

[Blubber]

You are on a roll 

[Matt-Man]

Nice job Yan....

[clivegto]

Very nice indeed as always. 

[yantosh]

had someone on custom fighters ask if i could get enough corner lean with that pipe .... I reckon so (even with sag etc) 

 

 

[Blubber]

that pic scared me... i thought i fell 

[yantosh]

1 hour ago, Blubber said:

that pic scared me... i thought i fell 

just proving a point   , not the ideal space to check lean angles in mind....

[vizman]

Definitely the most productive small workshop ever....

[Trentsteel]

That is some top quality work 

[yantosh]

glued together the bit of header that bolts to the head , shop bought bends weren,t going to cut it 

 

 

tight fit, but it fits 

 

 

 

 

i did a bit more to the other pipe, but made a cunt of it and chopped it off 

Edited May 21, 2020 by yantosh
pics not showing

[Captain Chaos]

Pics not loading 

[banoffee]

56 minutes ago, Captain Chaos said:

Pics not loading 

Same here. @yantoshyou can upload pics directly on here rather than needing to use photobucket etc.

[yantosh]

4 minutes ago, banoffee said:

Same here. @yantoshyou can upload pics directly on here rather than needing to use photobucket etc.

edited 

[fatblokeonbandit]

On 5/17/2020 at 6:07 PM, Blubber said:

You are on a roll 

Ham or cheese and pickle.???

 

plenty of clearance with that angel of the dangle.

Looking good, shipmate, looking good.

 

 

[yantosh]

welded rings to the top of the bellmouths and had a colleague rad them in a cnc lathe 

 

[yantosh]

plenty better welding guys out there, but i,m reasonably pleased with myself. 

still needs two springs to hold these parts together, but they ordered 

 

front header still needs some work 

 

[yantosh]

front header glued together 

 

[yantosh]

not the best welding weekend... mask has decided that it wont always stay auto darkened when welding stainless tube with no filler, had to settle for just tacking the rest before I destroyed the full job . Works fine for Ally, but the gas run out ...too fast, hooked up a new bottle....hisssssssssss.... think regulators cracked

 

on the upside, both headers in one piece, and the collector started 

and the ally water pipe started