SATANSAM Posted May 23, 2019 Share Posted May 23, 2019 Hi there! Not much more to say, just that the clutch cable is new, correctly fitted.....I'm nearly sure it needs the clutch push rod changing...Any suggestions? Thanx frienzzz! 2 Quote Link to comment
Daveyboy Posted May 24, 2019 Share Posted May 24, 2019 8 hours ago, SATANSAM said: Hi there! Not much more to say, just that the clutch cable is new, correctly fitted.....I'm nearly sure it needs the clutch push rod changing...Any suggestions? Thanx frienzzz! Nice bike that! I replace push rods with stainless rod cut to length.bit of grease on both ends.I've had cheap cables be tight in past esp when there curved around head stock.have you checked the actuator cam in cover for binding at all the balls can dislodge when the cam gets worn.cheers. Quote Link to comment
SATANSAM Posted May 24, 2019 Author Share Posted May 24, 2019 Hi and thanx Daveyboy! Nice to know all this. I've tried adjusting the actuator on the in the cam cover, loosening the nut ant unscrewing the screw that backens the actuator, but seems there's no more play or "space". If I press the brake handle without screwing the cam cover the it's smoother of course but the cam is pushed back out my the actuator...A bit difficult to explane but anyway haha Thanx again! Quote Link to comment
Hacri Posted May 29, 2019 Share Posted May 29, 2019 Will the screw go further in than the outside of the nut? Quote Link to comment
SATANSAM Posted May 31, 2019 Author Share Posted May 31, 2019 Hi Hacri,mmm I'n not sure, I'll have a try! Quote Link to comment
SATANSAM Posted June 10, 2019 Author Share Posted June 10, 2019 Hey thanx Hacri! I'm going to give it a try. Cheers m8 really apreciated Quote Link to comment
Hacri Posted June 10, 2019 Share Posted June 10, 2019 Mine was also hard, but adjusting got it better, and with motion pro clutch cable it was like butter. Quote Link to comment
SATANSAM Posted June 10, 2019 Author Share Posted June 10, 2019 I just did it but no luck. Well, I did try before about a month ago without knowing well what I was doing and it got smoother...Anyway, I've got the new push rod for 15€ a week ago, I'll get to it in the next oil change. Thanx again Hacri! Quote Link to comment
SATANSAM Posted July 17, 2019 Author Share Posted July 17, 2019 Hi friends, The clutch was still hard, but could ride the bike...Saying this, going don the mountain road, the clutch cable came out the actuator or clutch release, however it's called, and had a terrible accident. 15 stitches and bad back. I'll never go through this again. Just to let everyone know whats happened and what can happen if the push rod isn't changed. Cheers friends, Sam. Quote Link to comment
Fazz711 Posted July 17, 2019 Share Posted July 17, 2019 Hi. Sorry to hear about your off. Hope you heal quickly. 1 Quote Link to comment
Blubber Posted July 18, 2019 Share Posted July 18, 2019 Nooo! Sorry to hear that. Get well soon. @Captain Chaos.... You have some followers 2 Quote Link to comment
Captain Chaos Posted July 18, 2019 Share Posted July 18, 2019 heal well dude. Just had an off myself a few weeks ago. No stitches, but a few broken bones. 1 Quote Link to comment
jensvonbustenskjold Posted July 18, 2019 Share Posted July 18, 2019 That's a nice bike 1 Quote Link to comment
wraith Posted July 18, 2019 Share Posted July 18, 2019 Bad news, hope you get well. 1 Quote Link to comment
SATANSAM Posted July 18, 2019 Author Share Posted July 18, 2019 Many thanx friends. Getting better, and bike is chanching color now! 1 Quote Link to comment
Hacri Posted July 18, 2019 Share Posted July 18, 2019 Good to hear you're up and about 1 Quote Link to comment
SATANSAM Posted November 13, 2019 Author Share Posted November 13, 2019 Hi there amigos, I changed the push rod, it was very simple, I can show photos and do a simple tutorial if anyone needs to know how to do it in this same bike. The clutch is perfect now, gears change so smoothly. Anyway, gettin there with the restoration....But still very naked as you can see! Cheers friends. Quote Link to comment
richyrich Posted November 23, 2019 Share Posted November 23, 2019 Oh no that was a sweet bike ! What was the fairing , any front pics of the old setup ? I reckon better in red now and chicks dig scars right 1 Quote Link to comment
SATANSAM Posted November 23, 2019 Author Share Posted November 23, 2019 4 hours ago, richyrich said: Oh no that was a sweet bike ! What was the fairing , any front pics of the old setup ? I reckon better in red now and chicks dig scars right Hi Richy! This is how the thing is going. Starting with paint now. Quote Link to comment
richyrich Posted November 24, 2019 Share Posted November 24, 2019 Yes fairing is back ! I like it , u don't need lights in Spain then ? 1 Quote Link to comment
SATANSAM Posted November 25, 2019 Author Share Posted November 25, 2019 17 hours ago, richyrich said: Yes fairing is back ! I like it , u don't need lights in Spain then ? Hahaha yes of course! Still have to installem Quote Link to comment
SATANSAM Posted November 25, 2019 Author Share Posted November 25, 2019 TANK PAINTED! Well, just needs lacquer coat. (Before and after). 1 Quote Link to comment
SATANSAM Posted December 4, 2019 Author Share Posted December 4, 2019 WHITE, RED & BLACK! 2 Quote Link to comment
SATANSAM Posted January 16, 2020 Author Share Posted January 16, 2020 Hi again amigos, Man, as I explaned before, I changed the push rod and the clutch release assembly. The clutch was smooth and workinf really well, but I noticed it keeps loosening! not from the lever and not from the cranckcase...everything well adjusted at lever, cranck and release screw and nut....Seems to be loosening somwhere inside?!?!?! Cheers. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.