-
Posts
532 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by kiwi
-
Mark your pretty close as Ian uses a wooden former to make the top outer shell then beats the bottom underside on a solid glassfibre plug/mould which is the video your referring to on youtube , he then pops over the top and works his magic to mate the two halves and ends up with said piece of Aluminium Artwork
-
Somebodies gotta ask but understand if rather not say but guessing No change from 1K , but it really is an absolute thing of beauty.
-
possibly a 750 top with 1000 bottom
-
Clive No Video never happened
-
Yes it is if you need more look up here as you might get a better idea of fitting https://www.custom-wolf-stuff.de/deutsch/custom-wolf-teile/motorhaltekit-gsx-gsxr/
-
Try Chris or Gary at Grumpy1260 you might get lucky
-
Balders i think your not alone in that view either
-
posted this before but keep this handy http://www.suzuki-katana.com/pdf/how_to_take_the_meter_apart.pdf will help you go further if need too
-
Largest overbore before resleeve in a 1100G is 75mm (MTC) but if used in a GS1000 with standard crank and rods is 1146cc
-
Normally aspirated or Turbo
-
And if your new LTFU rules is rules
-
i do not have a take on them bought unused of Mr Higham so maybe he knows who or why
-
You could measure the ring depths you have and check if same as these https://www.Eblag.co.uk/itm/WISECO-2913XC-PISTON-RING-RINGS-SET-74-0mm-74mm-/232398183144
-
Suzuki gs1100g barrels will bore out to 75mm and Suzuki gsx1150 liners will bore out to 77mm but both liners into gs1000 barrels need work And as we all like pictures here is one of Mine MTC 76MM PISTON
-
If you can find a cheap set Kawasaki, KZ1100, GPZ1100, GPZX1100,ZX1100, 1983 - 1984 MODELS ONLY , All 18MM Gudgeon/wrist pin size
-
I think you will find all the same Suzuki 550-750-850-1000-1100
-
But are they standard wheels ?
-
Not a equation i had considered mine was purely to guarantee spark happens. Why in this picture left plug looks like it has No ground electrode is there a reason ?
-
That is what google search does you never know were you will end up , but hopefully all sorted now as it first started on Faceache
-
say what now!? if you look above help needed
-
Wilco this is exactly what i am looking for but need a high resolution picture as going to be printed onto Tee shirts
-
Right you motley crew anybody possibly be extremely helpful and have a high resolution picture of side panel badge for above or the file for said
-
Vizzie cut me thru middle and it would read oldskool Suzuki GS/GSX i loves all my Suzook's, so yes i agree and rare keeps my stock price raising plus i am creating Art with it nowadays
-
Not sure i would bother with a GS1000 as oil burner more readily available and cheaper to tune, plus you might find Air cooled but good ones getting like Hens teeth