All Activity

It's a huge difference between them. So now I have switched to the left small one. Anybody know why this pipe Is plugged? They are setup for turbo (not by me)

ACC Billet Engineering makes some nice ones, but their site seems to be down right now. You can still find them over on facebook. I forget which other Suzuki caps fit, some have three bolts and some have four. I think most of the caps designed for the 4 bolt Suzukis through the nineties should fit, Ws, RFs, probably bandits.

Th jet on the right is meant for carbs with an air screw. From what Ive read some people say they work exacly the same as the left jet in carbs with a fuel screw and others say they run richer. Either way, make sure they are genuine Mikuni jets. The knockoffs are often not even close on sizes.

There a shit load of fun bud and quite addictive. Ride safe mate

Finally got a dry sunny day. Took the Blandit for my first spin. He he he Shoulda done it years ago when I was still a headbanger. Farkin awesome.

As PW says!

Many thanks for your answer sir

Along with "SEA FOAM"......as beloved of Youtubers "will it run after 20 minutes ?".....which is just ATF/Diesel .....Naptha ...and a bit of IPA . Bit like all those videos showing WD40 doing everything from rusty locks to curing cancer ....

I suspect it's 'Marvel Mystery Oil' - widely used in the colonies to fix everything LOL's

Probably lost the bolt and just glued the cap head In To stop the oil coming out, rest of the engine looks in remarkably good nick for a 28,000 miler, hopefully no more surprises. next sump off and check oil pump suction strainer for crap

Nice one shipmate, I couldn’t remember if I’d had it back from you, it’s old age you know, can’t remember my name some days

Reading this. I've still got your helicoil kit. I'm sending kris a cover on Sunday. I'll add it in with the parcel. Totally forgot about this sorry fboab

somebody tried to use a 6mm bolt?

Just so you know, i copied and pasted the numbers and the number 1 was added some how. He has changed the clocks to see if that made a difference. No change. This gsxr also has tps. Should it have a speed sensor as well . I'm popping over next week if I get chance ( I'm stripping my gsxr11). I'm going to video the cdi and loom and TPS and anything else I can think of. It's easier than typing

Oh dear. I copied and pasted the numbers but not sure where the 1 at the end came from. I just searched again minus the 1 and this is what I found. https://www.google.co.uk/search?q=131800-5680+gsxr750&sca_esv=d37586a3b186efe8&sca_upv=1&biw=432&bih=810&ei=Pkk1Zv_6AZGshbIP0qis8Aw&oq=131800-5680+gsxr750&gs_lp=EhNtb2JpbGUtZ3dzLXdpei1zZXJwIhMxMzE4MDAtNTY4MCBnc3hyNzUwMggQABiABBiiBDIIEAAYgAQYogRI8R9QlxtYlxtwAHgAkAEAmAFRoAGRAaoBATK4AQPIAQD4AQGYAgGgAleYAwCIBgGSBwExoAe_Aw&sclient=mobile-gws-wiz-serp

I owned one, but found it pretty slow. Maybe I had a duff one or it was just my perception at the time as I was riding a Guzzi Lemans 1 with a race tuned 950 motor at the time.

Always wanted a Kat1100. i bought one but it was too far gone and just moved it on. There used to be loads of them in the Nottingham area, but these days you just don't see them.

One on the left.

What is the update? I'm intrigued as to what the problem is on the 750. Did the Marvel (Which in the UK is a powdered milk. I'm assuming it's something else in the USA)cure it? Is the 1000 still running strong? Come on give the latest

I recently acquired a relatively low mileage 1200 MK1 engine, to do up and make shiny. First job sort the stripped thread in the cam holder, Went to find my box of 7mm helicoils and couldn't find it!! anyway tried to undo the bolts and it fell out !!! held in with silicone!! took the lid off and the thread is fine??? .. easy peasy

That would explain why it wasn't 'visible' at UK or European sources! Even so, it should be 'full power' unless the emission restrictions extend into the CDI's as well? This is really getting strange as its acting like the Jap market bikes with restriction based on speed but 86 mph is too low, they are restricted to 112mph I believe?, all done within the speedo - needle passes sensor and ignition cut occurs. This bitsa is turning into an enigma!

Hello, I'm fighting some issues with a gsx-r 1100 engine that are running pig rich at idle-3000rpm lambda 0,67-0,73 Adjusting the screw don't do mutch. Pilot jet are 30 and should be 45 according to the book? But is it the right one fitted? It's the one to the right in the picture, but should it be the one to the left without all the small holes?

32900-17E201 is listed as an igniter Unit 88-91 gsxr 750 California Only per Partzilla

IGNIII GNITER UNIT | CALIFORNIA ONLY 32900-17D20R UNIT