Slabby swinger pics

[Mole28]

Hi all, I'm looking for insipartion.

Can you post pics of your braced Slabby swinging arms?

Mine are 750F arms but any slabby arm pics will help.

[Simbec1863]

Do you want standard braced arms or aftermarket ones to, JMC etc

[Mole28]

Standard arms that have been braced. 

[Simbec1863]

Just checking@Rossco(Iceman Josros)has a standard braced one here’s a pic he will have better pics and details  and I’m sure @Wescooley19had one on his 7/11 that was in PS mag

Edited May 23, 2018 by Simbec1863

[Wescooley19]

Yes, i braced mine! All i did was cut n' shut some 25mm box, and brush finished it afterwards. 

[Blue]

R1 brace & adjuster blocks welded onto slabby arm 

Edited May 23, 2018 by Blue

[clivegto]

R1 brace welded onto the bottom of the standard arm.

[clivegto]

This one is a 1100 that I am building.

[Leblowski]

Brace made from sevenfifty frame rails swingarm is mated with slingshot linkage system wich turns out to work very very good !

[CockneyRick]

Got this swinger off Cosmo. No idea who extended & braced it tho!

[Markz9]

Here are a few alternatives 

[CockneyRick]

Out of curiosity, what is/are the std lengths (pivot>spindle) of the 750 & 1100 Slabbies?

No idea what mine is **" over!

[Mole28]

I ended up getting an early R1 swinging arm and cut it up. 

My main man Don then added most of the bits onto the 750F arm. 

Just got to make it fit now. 

[Rossco(Iceman Josros)]

On 5/23/2018 at 9:08 PM, Simbec1863 said:

Just checking@Rossco(Iceman Josros)has a standard braced one here’s a pic he will have better pics and details  and I’m sure @Wescooley19had one on his 7/11 that was in PS mag

Close ups are here @Mole. 

 

[Blue]

Which rear wheel you using Mole28?

[mikeyd]

The R1 add on brace is just pure genius! And looks awesome too.

[Mole28]

On 6/12/2018 at 9:50 PM, Blue said:

Which rear wheel you using Mole28?

SRAD 600