busa ash Posted May 13, 2018 Posted May 13, 2018 Ok so this is my 10 th gsx 1135 efe . The idea is go for my favourite colour scheme then modify as I go along . 5 Quote
busa ash Posted May 13, 2018 Author Posted May 13, 2018 The colour scheme head light and clocks are too change . In the short term it's been over bored and ported and jetted prior too me buying it Quote
baldrick Posted May 14, 2018 Posted May 14, 2018 you forgot the mudguard ! Only joking I'm sure its there. Nice starter, upgraded front and back end will save you some dosh. 1 Quote
busa ash Posted May 14, 2018 Author Posted May 14, 2018 (edited) Front lights sold and gsxr clocks sold . Replaced the tacky dominators. With a gsx 1400 lenses and copy rd 250 shell and rim . And set of bandit clocks till I can find efe clocks Edited May 14, 2018 by busa ash 1 Quote
busa ash Posted May 14, 2018 Author Posted May 14, 2018 Have fat bars being powdercoated and just looking on Eblag for big indicators Quote
busa ash Posted May 16, 2018 Author Posted May 16, 2018 Looking for gsxr swingarm M with dragslots and braced when one appears Quote
busa ash Posted May 27, 2018 Author Posted May 27, 2018 Rear hugger painted and swapped out a few non stainless bolts and roofing screws And found my s decals . Until the painter can paint them on after TT 8 Quote
busa ash Posted June 2, 2018 Author Posted June 2, 2018 Over in the isle of man for tt 2018 so out and about on the beasty 6 Quote
Rene EFE Posted June 3, 2018 Posted June 3, 2018 So that's 4 EFE's over for TT. I haven't seen another one yet Quote
busa ash Posted June 4, 2018 Author Posted June 4, 2018 On 6/3/2018 at 8:05 PM, Rene EFE said: So that's 4 EFE's over for TT. I haven't seen another one yet I am here till Thursday Quote
busa ash Posted June 12, 2018 Author Posted June 12, 2018 On 6/6/2018 at 9:30 PM, arnout said: Nice EFE. Not keen on the clocks though.. Just picked up a full rolling chassis with clocks 3 Quote
busa ash Posted June 28, 2018 Author Posted June 28, 2018 Front end needs a re fresh so gone for a gsxr k3 1000 radial set up. And bought a hagon gsxr l or m fitment rear shock as its got gsxr rear in the efe made some spacers for the abba stand and did oil and filter 5 Quote
Swirl Posted June 28, 2018 Posted June 28, 2018 Got any pics of the mods to get the gsxr rear end in there, gonna do the es are they much different Quote
busa ash Posted June 28, 2018 Author Posted June 28, 2018 paul was already done but can take pictures for you mate Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.