(cj )ciderjoe Posted April 28, 2017 Posted April 28, 2017 (edited) Heres the latest gsxr project my last being 5_6 years ago cant wait to start Edited April 28, 2017 by (cj )ciderjoe 1 Quote
(cj )ciderjoe Posted April 28, 2017 Author Posted April 28, 2017 Not sure wether to fighter or restore but all major bits are there including a motor and was cheap Quote
dupersunc Posted April 28, 2017 Posted April 28, 2017 That was a good buy that. Wasn't very well listed was it. 1 Quote
(cj )ciderjoe Posted April 29, 2017 Author Posted April 29, 2017 Dont know what happened there gsxr 1100k r6 seat unit with both seats and rear light all electrics rear shock engine mounts fat bars and renthals new in wrapping new twin dommies stainless 4_2_1 with stainless can carbs and pod filters rearsets not bad for 400 quid delivered 2 Quote
(cj )ciderjoe Posted April 29, 2017 Author Posted April 29, 2017 Now the hard part what to do with it Quote
(cj )ciderjoe Posted April 29, 2017 Author Posted April 29, 2017 Anybody have stock bodywnrk kicking around Quote
colinworth79 Posted April 30, 2017 Posted April 30, 2017 (edited) nice start to a project . Well worth £400 . Front end srad 750 or tl 1000. Edited April 30, 2017 by colinworth79 Quote
(cj )ciderjoe Posted April 30, 2017 Author Posted April 30, 2017 Not sure which tbh mate better pic here motor is 2nd gen bandit 12 and is mint Quote
(cj )ciderjoe Posted April 30, 2017 Author Posted April 30, 2017 Been sat at least 6 years inlets sealed though Quote
Madb Posted April 30, 2017 Posted April 30, 2017 ooh. lovely start to your project. engine inlet looks nice and clean. your forks. if you measure the at the yoke clamps soon tell. tl has bigger ones by a millimeter. 55mm i believe but i could be wrong. 1 Quote
(cj )ciderjoe Posted April 30, 2017 Author Posted April 30, 2017 (edited) Will check that tmoz thanks Edited April 30, 2017 by (cj )ciderjoe k1 ? swingarm ??? Quote
Madb Posted April 30, 2017 Posted April 30, 2017 if your swingarm has an "R" on the back if front of the wheel its a k series if the front part is all cast its a srad. 1 Quote
Madb Posted April 30, 2017 Posted April 30, 2017 oh and the srad arm will have the part no on the right hand side 33c00 Quote
(cj )ciderjoe Posted April 30, 2017 Author Posted April 30, 2017 Good to be back forgoten so much stuff about the suzukis since building other bikes thanks mate 1 Quote
Madb Posted April 30, 2017 Posted April 30, 2017 no worries. glad to help. it will all come back. suzukis are never far from the soul. and that should have been 33E00 for the srad markings. Quote
(cj )ciderjoe Posted May 1, 2017 Author Posted May 1, 2017 (edited) I only bid the price on a 1127 motor as my top bid lol Edited May 1, 2017 by (cj )ciderjoe Quote
(cj )ciderjoe Posted May 1, 2017 Author Posted May 1, 2017 20 hours ago, Madb said: if your swingarm has an "R" on the back if front of the wheel its a k series if the front part is all cast its a srad. No R on it so ime guessing its a srad will have to sort the linkage as its not right at the moment Quote
Paulm Posted May 3, 2017 Posted May 3, 2017 TL forks are 55mm in bottom yoke,50mm top I believe. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.