Simbec1863 Posted September 25, 2018 Author Posted September 25, 2018 Thanks @Captain Chaosstickers arrived today Quote
Captain Chaos Posted September 25, 2018 Posted September 25, 2018 6 hours ago, Simbec1863 said: Thanks @Captain Chaosstickers arrived today pics (on the RGV) or it didn't happen 1 Quote
Simbec1863 Posted September 25, 2018 Author Posted September 25, 2018 I here ya will get them fitted when I’m home at the weekend Quote
Simbec1863 Posted September 27, 2018 Author Posted September 27, 2018 Home early doing last minute MOT prep for tomorrow and fitted these while I waited for the engine to heat cycle to check for a small leak I think I’ve fixed,hopefully 2 Quote
Simbec1863 Posted September 27, 2018 Author Posted September 27, 2018 (edited) Fairings back on had to bodge fit a bit of it with some old bolts can’t find the new ones I thought I bought Ready for mot in the morning now fingers crossed Edited September 27, 2018 by Simbec1863 2 Quote
E T Posted September 27, 2018 Posted September 27, 2018 Lovely bike. It must sound awesome with those tyga pipes. 1 Quote
Simbec1863 Posted September 27, 2018 Author Posted September 27, 2018 5 minutes ago, E T said: Lovely bike. It must sound awesome with those tyga pipes. It sounds ace if I wasn’t such a retard I’d post a video but don’t know how to Quote
Simbec1863 Posted September 28, 2018 Author Posted September 28, 2018 Mot pass no advisories,then rode to Darley Moor to watch a track day,done about 70 miles just need to few more to run the top end in Back on the road after 3 long years 8 Quote
Madb Posted September 29, 2018 Posted September 29, 2018 i bet ya feel all 17 years old again,eh! lush. weather looking good for a bit too.. happy days. 1 Quote
Simbec1863 Posted September 29, 2018 Author Posted September 29, 2018 Sun out today so got up and uncovered the old girl ready for a blast and found a nice pool of coolant underneath . Tank,side panels etc off and it’s a bit more than a weep,thermostat housing is leaking like a good un,stripped it down and it’s only a perished o ring,checked my spares and I don’t have one,so looks like I’ll have to order a new one and fit it next weekend. Reset the throttle valve gaps while the tank was off and sorted a few bits that were loose after the ride yesterday. Forgot how 2 smokes need a bit more TLC than the old oil boiler,still she was on the road for a whole 24 hours Quote
Simbec1863 Posted September 29, 2018 Author Posted September 29, 2018 36 minutes ago, E T said: Bummer ! The joys of old bikes eh . It was one of the few jobs that I thought didn’t need doing when I rebuilt it,tried to save a few quid ,oh well this is why we own these old things so we can tinker with them 1 Quote
Simbec1863 Posted October 5, 2018 Author Posted October 5, 2018 O ring and new bolts arrived today fitted just need to test for leaks,found the replacement tank rubber I thought I’d lost so stuck that on to 1 Quote
Simbec1863 Posted October 7, 2018 Author Posted October 7, 2018 Another 40 miles today leak seems fixed ,just need to finish running the motor in 1 Quote
busa1300 Posted October 7, 2018 Posted October 7, 2018 Looks great, and makes me want to get mine out before the weather turns to snow. Sadly, I haven't had any of my strokers out or worked on anything since I got my new 1290 SDGT.... Quote
Simbec1863 Posted October 13, 2018 Author Posted October 13, 2018 Another weekend another leak,stripped off the housing for the thermostat again and dismantled it gave it another clean,stuck in a new thermostat while it was off,bolted up and refitted.Maybe this time I’ve managed to sort it. Quote
Simbec1863 Posted November 17, 2018 Author Posted November 17, 2018 Rode the smoker a fair bit now so engine is run in ,still some issues to sort,not feeling quite right and the power valves need a programmer to fine tune the curve so bit the bullet today and ordered a zeeltronic Back brake needs sorting as well ,needs repainting as I spilt brake fluid on it and missed cleaning it off so it’s now stripped itself Wheels back from powder coaters to so need to fit the running gear and new bearings then stick the some rubber on them . Just a few last jobs before the winter arrives. Quote
Simbec1863 Posted December 7, 2018 Author Posted December 7, 2018 These bits arrived today ready for the last few jobs over the winter 2 Quote
nachopa Posted December 17, 2018 Posted December 17, 2018 One of my favourites bikes, no doubt. In Spain they are almost impossible to find Quote
Simbec1863 Posted December 27, 2018 Author Posted December 27, 2018 (edited) Getting her ready for Newark in a couple of weeks New bearings in the good wheels,tyres being fitted tomorrow,replaced the non working rhs switch gear with a cheap second hand one of the bay of e,junked the crap onda racing reservoir and put the Suzuki one back on after fitting a master cylinder repair kit,should have known better than buying HRC...... Still need to bleed the rear brake and swap the wheels over bits that’s a job for another day as I feel a beer calling me Edited December 27, 2018 by Simbec1863 1 Quote
Simbec1863 Posted January 3, 2019 Author Posted January 3, 2019 Rear brake bled up,wheels back from having the tyres fitted,stuck some new disc bolts in for good measure,just need to swap the wheels over tomorrow then she’s ready for Newark 1 Quote
Madb Posted January 4, 2019 Posted January 4, 2019 Me just turned green! Thier shall be many looking at the show . Yum yum.Awesome 1 Quote
Swiss Toni Posted January 4, 2019 Posted January 4, 2019 A thing of beauty, Si! Something to be proud of! 1 Quote
Simbec1863 Posted January 4, 2019 Author Posted January 4, 2019 (edited) Better pic Edited January 4, 2019 by Simbec1863 6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.