Jump to content

Recommended Posts

I love 2 strokes had an rgv once 74bhp on dyno with print out , was running full f3 spec kit , bought off a guy  who had imported a load of bikes from japan and didnt want it so i got it cheap, :D

Share this post


Link to post
15 hours ago, teapot said:

I love 2 strokes had an rgv once 74bhp on dyno with print out , was running full f3 spec kit , bought off a guy  who had imported a load of bikes from japan and didnt want it so i got it cheap, :D

That must have been like a grenade waiting to go off.

But fun..

  • Like 2

Share this post


Link to post

Incredible bike man. I wish to buy one but they are out of my range :$

  • Like 1

Share this post


Link to post

Not much progress but committed to the dyno day and a track day in July so will be nipping over to see my mate in a week or 2 to get the zeeltronic fitted and setup,  to busy getting the race bike ready so having to call in a few favours to get the RGV ready in time.

Share this post


Link to post

Quick spin this afternoon only out for 30 mins then realised I’d left my wallet at home when she went onto reserve and the oil light came on so had no choice than stop for a quick pic and head back home.

Running loads better and lifts the front wheel on acceleration even with my bulk on board:D

85893EC9-F095-41C9-B9A9-44D0B081E0A6.jpeg

Share this post


Link to post

Ran out of fuel and forgot your wallet at the same place... different day?  ;)

  • Like 1

Share this post


Link to post
41 minutes ago, Blubber said:

Ran out of fuel and forgot your wallet at the same place... different day?  ;)

xD same day different picture:D

  • Like 1

Share this post


Link to post
35 minutes ago, Madb said:

norwich to fakenham road?

 

Elvaston Castle Derby

  • Like 1

Share this post


Link to post

ok. looked similar to a place on that road. bit further away!

 

  • Like 1

Share this post


Link to post
Posted (edited)

Rode over to Sleaford Saturday to get the Zeeltronic fitted and set-up.Bottled doing it after looking at the multiple unfinished wires and not wanted to start chopping plugs off just in case I killed the electrics I got Sean at the Tuning Works to sort it for me.

I made the tea and did the strip down and rebuild while Sean did the leccy/tech jobs.

Nice clean install and the ability to unplug and replug the existing loom back in just in case the box is ever faulty.

Plug into Sean's laptop and set the parameters for valve opening(8,000 to 10,600rpm), quick test ride and all's now good with the motor.The ride home was a blast :D,the lightly tuned motor is now on song ready for Dyno day in July.I have a handheld programmer so can just plug in and set the rpm to valve opening % if I need to further fine tune, without the need to take a laptop with me.

Ran out of fuel on the way home as I was getting excited and missed the petrol station while on reserve....short push to the next one.

Even getting 29 to the gallon which is good for the grin factor and lifts the front end in 1st and 2nd gear from a standing start :tu

IMG_5588.jpeg

IMG_5187.jpeg

Edited by Simbec1863
  • Like 2

Share this post


Link to post

I may have to get me one of those there fancy magic boxes.

My 22 has a mahoosive hole in the power at 8K,

  • Like 1

Share this post


Link to post
Posted (edited)
12 minutes ago, SiBag said:

I may have to get me one of those there fancy magic boxes.

My 22 has a mahoosive hole in the power at 8K,

Well worth it,I've only got the p/v controller as I ran out of funds but they do a CDI/PV box that gets rid of the standard kit and is fully programmable and even has a quick shifter option I'm told they give better gains on the VJ22 than the 21.Can't believe the difference in the bike now 

Edited by Simbec1863

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...