Dezza Posted May 1, 2023 Share Posted May 1, 2023 Do you still intend on fitting an under seat cooler? Quote Link to comment
clivegto Posted May 1, 2023 Author Share Posted May 1, 2023 1 minute ago, Dezza said: Do you still intend on fitting an under seat cooler? Yes. Quote Link to comment
Dezza Posted May 1, 2023 Share Posted May 1, 2023 What are the plans for the seat unit, remove the bit for the pillion and fit louvres or a grill? Quote Link to comment
clivegto Posted May 1, 2023 Author Share Posted May 1, 2023 Just now, Dezza said: What are the plans for the seat unit, remove the bit for the pillion and fit louvres or a grill? Yes that is the plan 1 Quote Link to comment
clivegto Posted May 2, 2023 Author Share Posted May 2, 2023 For the right hand side panel the frame already had a tab on near where the repaired mushroom is on the side panel which was nice coz it was an easy job to make a bracket unlike the left side. 2 Quote Link to comment
Gpz1100_Convert Posted May 3, 2023 Share Posted May 3, 2023 fyi clive. if its the same as mine. TZ750 tank strap for the front of the tank. I bought three till I got the right one! I did hear that on the really early spondons they used rubber belt off those old metal upright hoovers drive belts. Mark Quote Link to comment
clivegto Posted May 4, 2023 Author Share Posted May 4, 2023 20 hours ago, Gpz1100_Convert said: fyi clive. if its the same as mine. TZ750 tank strap for the front of the tank. I bought three till I got the right one! I did hear that on the really early spondons they used rubber belt off those old metal upright hoovers drive belts. Mark Hi Mark, yea I heard that Harris used to get the rubber rings from the hoover shop down the road. 1 Quote Link to comment
clivegto Posted May 4, 2023 Author Share Posted May 4, 2023 The 5" lights turned up so I roughly mounted them on the top cooler bracket to see what they look like. I also started to make the bottom oil cooler mount. Going to make something that bolts to the sides that directs ait to the cooler like I've seen on some LC's and I seem to remember 370steve did some thing like this as well. 3 Quote Link to comment
DAZ Posted May 4, 2023 Share Posted May 4, 2023 Some very tidy one off parts you're creating there, its going to be a very special build of an already special bike Quote Link to comment
clivegto Posted May 4, 2023 Author Share Posted May 4, 2023 16 minutes ago, DAZ said: Some very tidy one off parts you're creating there, its going to be a very special build of an already special bike The more I work on this bike the more I like it and I have a vision in me head what it'll look like when finished. Can't wait to ride it . 2 Quote Link to comment
Jdeac Posted May 4, 2023 Share Posted May 4, 2023 As youve said to others. IS IT DONE YET!! Looking goog clive Quote Link to comment
clivegto Posted May 4, 2023 Author Share Posted May 4, 2023 1 hour ago, Jdeac said: IS IT DONE YET!! Nearly Quote Link to comment
clivegto Posted May 5, 2023 Author Share Posted May 5, 2023 Light mounts I made wouldn't work with the new light so I've just altered the mounts the new lights came with. 5 Quote Link to comment
Paulm Posted May 5, 2023 Share Posted May 5, 2023 You might find you need some sort of stay on the spots Clive to stop them shaking if you plan on using it in the dark. 1 Quote Link to comment
clivegto Posted May 5, 2023 Author Share Posted May 5, 2023 6 minutes ago, Paulm said: You might find you need some sort of stay on the spots Clive to stop them shaking if you plan on using it in the dark. Yea the ones on the Harris get a few vibes on Quote Link to comment
clivegto Posted May 21, 2023 Author Share Posted May 21, 2023 Been thinking about the light's a lot. Now the 5" ones are 500g each and the 4" one's are 200g so the 4" one's I will be using just because of the weight saving. Now I mocked them up higher and further forward more like the look of Hoover although there smaller. I quite like this look so think it'll be staying. 4 Quote Link to comment
clivegto Posted July 6, 2023 Author Share Posted July 6, 2023 So Dymag's happened 9 Quote Link to comment
Wagola Posted July 6, 2023 Share Posted July 6, 2023 You source some serious shit ! Wish I had your contacts or search engine ! 2 Quote Link to comment
Jdeac Posted July 6, 2023 Share Posted July 6, 2023 1 minute ago, Wagola said: You source some serious shit ! Wish I had your contacts or search engine ! Same hear. @clivegtomust have got rid of the chickens and invested in scouts to find bike parts!! Lol 2 Quote Link to comment
clivegto Posted July 6, 2023 Author Share Posted July 6, 2023 Dymag's came from a mate the same mate I got the Turbo Scratchers frame (NWS frame) from a few years ago. He's an interesting man he's sold some of his bikes of recently and still has a different 1100 Sabsid to ride every day of the week. How cool is that 3 Quote Link to comment
R1guy Posted July 6, 2023 Share Posted July 6, 2023 26 minutes ago, clivegto said: He's an interesting man he's sold some of his bikes of recently and still has a different 1100 Sabsid to ride every day of the week. How cool is that That’s a proper 7/11 2 Quote Link to comment
clivegto Posted July 27, 2023 Author Share Posted July 27, 2023 2017 ZX10 forks & yokes, also got my hands on a set of ZX10 supper bike yokes. Top one stepped the wrong way lol. 2 Quote Link to comment
Dezza Posted July 27, 2023 Share Posted July 27, 2023 You'll have to fit the top yoke upside down then Quote Link to comment
clivegto Posted July 27, 2023 Author Share Posted July 27, 2023 1 hour ago, Dezza said: You'll have to fit the top yoke upside down then That thought had crossed my mind, unfortunately it has pockets underneath. Perhaps I could fill them with something and fit risers 1 Quote Link to comment
clivegto Posted September 5, 2023 Author Share Posted September 5, 2023 Mechanical scavange pump 4 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.