-
Posts
1,813 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Havoc
-
-
-
Those photos were taken the day I customized my foot......
-
-
1 hour ago, wraith said:
That will be a stoncking motor
I'll find out on Saturday, once I've put new tyres on it and got it an MOT and given it some new oil, filter and plugs.
- 1
-
-
GSXR1100G Slab Side mine are not in good condition. Repair or blank off? Thanks
-
Afternoon all. Do people use 525 or 520 having installed fatter wheels in their Slabby?
I thank you
-
Evening brothers. GS1085 Slabby will be presentable by then, not finished paintwise but something to look at. Count me in, DrBig will be there also so people can have a thrash on it...Rene
- 2
-
-
On 3/2/2019 at 4:48 PM, Harry74 said:
Okay, so it would seem I can access OSS on the work computer
These are the people who have definitely said yes
And those that have said they may be able to come
If you could all confirm if you can attend that would be great. Thanks
I'm still hoping to bring the DR Big along but it's dependant on the health of my father. I don't think I can be relied on, will visit if I can't do the whole thing.
-
It's possible Suzanne and I are in London that weekend. Young Gods are playing the O2. I'll keep you posted, I'll know very shortly.
-
-
1 hour ago, Gixer1460 said:
I'm struggling to see a 'first generation' frame there!
He started the frame surgery after about 8 pages. Not very neat though. I will do the same dimension changes to top rails, bottom rails and front rails but so as you'll not be able to tell. It'll be cool I have a cut up frame to nick correct extrusion bits from. Head stock will be about 6mm higher than stock, will not overly effect rake with standard forks. The new CNC router at work will make the slugs...
-
On 1/2/2019 at 3:24 PM, Arttu said:
Here is a pretty informative thread: https://www.thegsresources.com/_forum/showthread.php?229202-GS-1000-engine-in-GSXR-1100-first-gen-frame
Perfect Arttu, I reckon I could do the frame neater than that
-
On 1/2/2019 at 7:39 PM, Gixer1460 said:
Can't actually see the appeal as it weighs lots more!
Dan Hegarty gave me the motor just before he went off to Macau, he took an OSS Slabby round the classic TT the year before. XR41 ish tribute bike.
-
12 minutes ago, YoshiJohnny said:
the frame rails top and bottom need cutting and extending as the air cooled lump is huge compared to the oil cooled one and simply won't go in the hole. Then you need to line the front downtubes so the exhausts don't foul and make the engine mounts.
Like putting an FJ in a GSX then but ally. I do have access to 2 chopped up Slabby frames so sourcing short lengths of the necessary extrusion won't be an issue. I've got other stuff to do first, like rebuild the engine and the shafty to fiddle with.
59 minutes ago, vizman said:wtf were you drinking over the silly season?
I've been more sober over the last couple of months than at any other point in the last 35 years... X
-
Is there any info on the site or the available archives that details the modifications required to fit a GS1000 lump in an 1100 Slabby frame? Thanks
-
-
I've spend nearly £800 in the last 2 years rebuilding mine, twice, and it's just gone again. Not rebuilding it again....
-
2 hours ago, VJ said:
can you not get different bearings to suit Tom?
I reckon I can get a spindle made up for less wonga than a couple of bearings and a spacer..
-
-
On 10/5/2018 at 5:10 AM, jimbob43 said:
Getting new rims laced to the hubs sounds like a plan, what rims are you using
Don't know, I suspect Borrani but they were pretty rough before I had them powder coated. Accel rims from a DRZ400SM would be as good as any..
-
Next I would look for an air leak between carbs and head, can often be the cause of reluctant return to tickover. Cracked inlet rubber or missing balance plugs..
-
Just for info, heavy turbo charged GSXs aren't suitable....
- 4
Nico Bakker
in Trick Frames
Posted
Sander's beautiful Bakker is coming to live at my house. In the living room if Suzanne lets me
Very happy chappy. X