-
Posts
4,368 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by fatblokeonbandit
-
The gear on the clutch basket is 37 teeth on the small cog that drives the oil pump and 66 in the bigger one that drives the alternator
-
1989 1100k alternator gear 22730-06B03 gear drive generator ( NT 28) So 28 teeth....
-
sons RG125 gamma
fatblokeonbandit replied to et1170's topic in Water Cooled, V-Twins, Singles and 2-strokes
Or eat more pies Good lad give it some where was that taken.. -
Ive done 2 b12's with 750 DOT head and cams, cheapest bolt on HP there is, just cams on a std motor with race can made 122RWHP on a dyno, same engine with head as well was 133 rwhp on same dyno, makes the buggeres rev well as well.
-
The triumph thunderbird hub is £250 with no discs or anything, so with discs and vat its well ovef £400, i got the complete twin disc thunderbird front for £295 from Eblag, i made all the spacers a d fitted non standard hond* wheel bearings to fit theR1 spindle, vfr discs were £80ish.? The rear was the really expensive bit, Doug at devon wheels built it, loverly job
-
No idea bout talon hubs apart from they are fookin' expensive, a twin disc hub was nearly £400 on its own!!!!!!!!!!!!!!!!!!!! those ISR hubs are 8,880 Swedish kroner for a rear with cush drive, I think that's £870 pounds But I could be wrong.... thsi is why I used triumph wheels much cheaper but still expensive
-
Shiney pipes I had trouble with the small carbon can and the noise tests at cadwell, so I got a scuffed 50mm can off of e**y and chopped it down, fake Yoshi badge and Voila much easier to baffle and keep quite for the tests.
-
Different types of Harris frames pics wanted
fatblokeonbandit replied to FJD's topic in Trick Frames
Mines first reg october 1983 and says magnum 2 on th v5. And the frame number is HP with a 3 didgit number in the mid 480's -
Only time ive been successful doing this was with a small left handed drill...as it cut in it bit and it whizzed out
-
Different types of Harris frames pics wanted
fatblokeonbandit replied to FJD's topic in Trick Frames
My mag 2, I couldn't find a frame number either until I scraped all the old paint off the head stock and there it was, HP and 3 digits looked like a 3 year old had stamped it!!!!!! once it was powder coated I couldn't read it so I got an ally plate with it stamped on and fixed it on.. I was told the mark 1's don't have the 2 fairing fixings on the bottom rail on the side, and mark 2's do.. -
anyway, after much family visiting and doing a track day at Pempray in the pissing rain, time to crack on shiny sparkly clean mikkies, care of Mcmental fitted the remote tick over adjuster from a gsxr as well all know what a pian bandit carbs are got my down pipes back from froudys polishing shop
-
Fork internals Gsx-R 750 WR
fatblokeonbandit replied to badgerkdd's topic in Water Cooled, V-Twins, Singles and 2-strokes
Get linear springs of the correct rate for your weight, m6ch better than progressive ones, not sure if anyother internals fit though -
Same part numbers same parts shipmate
-
I didnt know jackie chann had a slabby???
-
Nooooooooo.... i havent finished fitting yhe big 1216 engine yet, too much work too little time!!
-
Nope Triumph, the front a Thunderbird sport wheel, the only twin disc 17 x 3.5 incher,, The rear is a hub from the same but it was only 4.5 inches, I had a stainless 5.5 inch rim made and fitted. Cost a bloomin' fortune but worth it I think,,,??? I'm still not 100% convinced about them..
-
Nope its fitted with a nice stainless stone guard
-
Fodster, hows my yamagamamama is it still going??
-
Oh?? Thanks very much Jay111 I think
-
thats good i thought id missed somthing.!! but what dose it mean, is it good or bad??
-
Am I being old and stupid ?? What dose "For The Mother Fucking Win" Mean????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
-
Am I being old and stupid ?? What dose "For The Mother Fucking Win" Mean???
-
Am i being old and stupid?? Whats FTMFW mean??
-
dose it knock under load, on the over run, all the time????