Crankcase breather routing

[Billythekidd]

Any body have any pictures of their crankcase breather, catch tank set ups for a bit of inspiration or so I can tell people it was my idea!! 

[dupersunc]

This the one I built for @Markz9and have the same on my slabbie. it mounts and raises the seat unit, there is a -6 from the cam cover that feeds in to bottom but an internal tube means it goes to the top of the tank, a -10 goes from a modified clutch cover directly to the bottom of the tank so any oil can drain back to the sump, as well as allowing it to breath, a 3/4" peace of flexi hose runs from the top rear of the tank to atmosphere.

[clivegto]

Breathers from the clutch cover & cam cover, there is a vent tube at the back pointing at the top of the frot sprocket.

[370steve]

[Billythekidd]

Yes yes yes some really neat stuff there, love the under seat one dupersunc and the other words look really neat and tidy, some ingenious stuff, I'd better get ordering!!

[Markz9]

 

This the one I built for @Markz9and have the same on my slabbie. it mounts and raises the seat unit, there is a -6 from the cam cover that feeds in to bottom but an internal tube means it goes to the top of the tank, a -10 goes from a modified clutch cover directly to the bottom of the tank so any oil can drain back to the sump, as well as allowing it to breath, a 3/4" peace of flexi hose runs from the top rear of the tank to atmosphere.

this works well now I have managed to get it out on the track and try, it also lifts the seat unit to just the right height so does two jobs 

[Billythekidd]

On 7/18/2018 at 12:25 PM, Markz9 said:

this works well now I have managed to get it out on the track and try, it also lifts the seat unit to just the right height so does two jobs 

Love the bracing on your frame mark, I should have come for a nosy at donnington, I'm at castle Combe tomorrow on the slabbie, 

[colinworth79]

Couple of pics - 

from suzuki hot up gsxr manual. 

Catch tank of my bandit 

[bYmi]

Don't have any better pics but -6 from valve cover (where the original also comes) and then from oil cap -8

 

[Markz9]

On 7/20/2018 at 5:59 PM, Billythekidd said:

Love the bracing on your frame mark, I should have come for a nosy at donnington, I'm at castle Combe tomorrow on the slabbie, 

Hi no problem a lot of it is hidden under the tank was very solid around spa even out the back through la source I am at donington mid Aug formula pro stock and 1/2 sept castle Combe and will have both race bikes there if you want a look

[Brians 7/12]

So mine is a bit of 6” hose & a small cone filter... guessing I should really change this?... my old one had a 3ft long hose pipe directed down towards the front sprocket cover with an open end to dribble on to the chain !? :-o