Swirl Posted April 7, 2018 Posted April 7, 2018 9Rustynail has got me salavating over a Gsx750es that I know of, it's had a fire in the headlight bowl, so that means it needs a loom and if your swapping the loom you may as well swap the engine right? here comes the good bit, I've got a gsxr 750m motor and some 38mm carbs headers usd front end, I've also got gsxr 750m complete swingarm with 5.5" wheel but I also have a braced srad 750 complete rear end but I have a 5.5 wheel and 6" wheel so various options, i would like to use the srad arm if I get it, with which ever srad wheel and the slingshot usd front end with a b12 wheel, 750m motor for now, looking in to b12 turbo in the future, thoughts please Quote
vizman Posted April 7, 2018 Posted April 7, 2018 if you're gunna' do it, i'll move it to the projects section Quote
Swirl Posted April 7, 2018 Author Posted April 7, 2018 Will be going to look at it tomorrow or Monday evening Quote
Cobby Posted April 7, 2018 Posted April 7, 2018 The slingshot swingarm won't fit without machining the pivot down, not sure about the srad swingarm. I used a bandit arm which needed some custom top hats to suit the smaller gsx750es pivot spindle Quote
kingofvenus Posted April 7, 2018 Posted April 7, 2018 I've got the arm off a '94 1100 on mine. Had to shave a tiny bit off the frame and the arm to squeeze her in. The stock bearing sleeves fit right into the new arm allowing use of the stock pivot bolt. Quote
Blubber Posted April 7, 2018 Posted April 7, 2018 See.... A lot of post say you need to do it. Is that enough confirmation? 1 Quote
Swirl Posted April 7, 2018 Author Posted April 7, 2018 4 hours ago, Blubber said: See.... A lot of post say you need to do it. Is that enough confirmation? I'm away back maybe tomorrow or Monday, then I'll go sort it 1 Quote
Swirl Posted April 8, 2018 Author Posted April 8, 2018 4 hours ago, Swiss Toni said: It'll be gone by then!!! Hopefully cus I can't afford it Quote
Swirl Posted April 9, 2018 Author Posted April 9, 2018 Been and seen it today, looks ok from the rear picture, the front end is toast, I know I was going to change it but was thinking of throwing it on the road as is, dilemma now do I buy a bike can't afford, it's a bridge to far at the mo I think Quote
Cobby Posted April 9, 2018 Posted April 9, 2018 How much is it, if it's cheap enough I'd buy it and throw a tarpaulin over it till you can do it justice 1 Quote
Swirl Posted April 9, 2018 Author Posted April 9, 2018 I've got half a dozen projects floating round already, need to get some graft done and get some shifted. Quote
Blubber Posted April 10, 2018 Posted April 10, 2018 wow.. i see your dilemma. but if you move sell the kiddy bikes, the mini bike and the bike scooter... or just finish the 1100F project first 1 Quote
Swirl Posted April 11, 2018 Author Posted April 11, 2018 23 hours ago, Blubber said: wow.. i see your dilemma. but if you move sell the kiddy bikes, the mini bike and the bike scooter... or just finish the 1100F project first The kids would cut my balls off 1 Quote
Swirl Posted April 11, 2018 Author Posted April 11, 2018 The things you can't see, there's also a 110 quad under the bench to the left of the fridge and 50 two stoke quad on the bench under the cover a dr50 pit bike and the oset trials bike in there Quote
gsx Posted April 11, 2018 Posted April 11, 2018 Feel your pain , bought a 500 sov 750 m just after I lent (gave) me lad a permanent loan . Get it and eat beans for rest of month Quote
Swirl Posted April 17, 2018 Author Posted April 17, 2018 Well I've ate beans for a bit and here we go I'm the owner of a Gsx750es, next thing to do get it to run 3 Quote
Rustynail Posted April 17, 2018 Posted April 17, 2018 If your keeping it standard for now and the front end is no good, I've got complete front end gathering dust Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.