Jay_111 Posted August 2, 2017 Share Posted August 2, 2017 Hello all, I need a bit of collective forum advice. I've got a 1100N which I pulled the motor and had Roger Upperton build to full 1216 spec. The bike was going to be a base for a nice project but now I want to keep the tuned motor for another build and get the 1100 back to stock and sell on. I can get a 1200 bandit motor way cheaper than a GSXR11 so wondered what I need to do to get it to fit? Any help would be appreciated. Cheers all Jay Quote Link to comment
Captain Chaos Posted August 2, 2017 Share Posted August 2, 2017 swap the sump pan and oil strainer, and the intake rubbers. 2 Quote Link to comment
vizman Posted August 2, 2017 Share Posted August 2, 2017 5 minutes ago, Captain Chaos said: swap the sump pan and oil strainer, and the intake rubbers. wot he said 1 Quote Link to comment
fatblokeonbandit Posted August 2, 2017 Share Posted August 2, 2017 Dont forget the oil drain tube, the L/H one is different. And if you are swoping alternators the drive gear has to stay with the engine as the number of teeth is different. 1 Quote Link to comment
Swirl Posted August 2, 2017 Share Posted August 2, 2017 Or put a 1127 powerscreen motor in it Quote Link to comment
dupersunc Posted August 2, 2017 Share Posted August 2, 2017 Don't really need to do the sump depends on what exhaust you are using. 1 Quote Link to comment
fatblokeonbandit Posted August 2, 2017 Share Posted August 2, 2017 if , as he says, hes puting it back to standard, the bandit sump will get right in the way Quote Link to comment
Swiss Toni Posted August 2, 2017 Share Posted August 2, 2017 Powerscreen! Reasonable power...less hassle! 1 Quote Link to comment
Swirl Posted August 2, 2017 Share Posted August 2, 2017 I got one here and one coming powerscreen that is 1 Quote Link to comment
Swiss Toni Posted August 2, 2017 Share Posted August 2, 2017 (edited) There ya go, Jay. Fill ya boots! Edited August 2, 2017 by Swiss Toni 1 Quote Link to comment
Swiss Toni Posted August 2, 2017 Share Posted August 2, 2017 1 hour ago, Swirl said: I got one here and one coming powerscreen that is Could be a 'problem solved' Jay. Have a word with the nice man! 1 Quote Link to comment
Jay_111 Posted August 3, 2017 Author Share Posted August 3, 2017 Thanks Guys, Brilliant info. @Swirl, you have a PM Quote Link to comment
suzook12 Posted August 3, 2017 Share Posted August 3, 2017 I got an L motor here Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.