Swirl's Harris

[clivegto]

2 hours ago, wraith said:

Wow this bike looks soooooo sweeeeet 

Thanks bud, just need to put the rest of it back together  and make loom up  easy 

[wraith]

So you're leaving the fun part till last 

[clivegto]

7 minutes ago, wraith said:

So you're leaving the fun part till last 

Indeed I am 

[clivegto]

To make a bit more room I took another 1.5mm of the k9 sprocket carrier and 1.5mm of the front sprocket spacor. Loads more room now lol, still doing the 525 chain conversion though.      

[clivegto]

[Pheasantplucker]

Is that the new touch screen speedo?

Looks smart.

[clivegto]

2 hours ago, Pheasantplucker said:

Is that the new touch screen speedo?

Looks smart.

No. 

[Pheasantplucker]

Looks like a real decent product.

Factory look and quality, if it didn’t have the KOSO badge you’d think it was Suzuki.

[Dezza]

It's a shame no-one makes an aftermarket tacho like these ones with the correct scale for an OSS oil boiler: they're either 10K (ok for aircooled) or 14-15 (ok for a smaller engined bike). 12 would be optimal, although personally I'd buy one that ranges 0-11k, just to be able to say: 'mine goes up to 11' whenever I had the chance .

[clivegto]

 Think @Fazz711found one. 

[clivegto]

[Fazz711]

7 hours ago, clivegto said:

 Think @Fazz711found one. 

What a tacho? 

[370steve]

19 hours ago, Dezza said:

It's a shame no-one makes an aftermarket tacho like these ones with the correct scale for an OSS oil boiler: they're either 10K (ok for aircooled) or 14-15 (ok for a smaller engined bike). 12 would be optimal, although personally I'd buy one that ranges 0-11k, just to be able to say: 'mine goes up to 11' whenever I had the chance .

Dash2 has adjustable tacho

[clivegto]

Adapted a set of b12 throttle cables to fit under the tank.    

[clivegto]

Got the 525 44 tooth back sprocket and the 525 chain turned up as well. Set about whittling the 530 17 tooth offset sprocket down to 525, end result came out alright.         

[baldrick]

Its taking shape nicely now, good stuff.

[clivegto]

Caliper spacors that came with my hel calipers I used to space the yam calipers out on the K5 forks were narrower than the mounting points which looked odd to me. So I ordered some 25mm billet bar to make some up myself on my little lathe.   Looks much better now I think.  

[clivegto]

Fitted the fuel return & tractor petrol tap to the tank. Also fitted the fuel cap, had to put a slit in the retaining ring to get it inside the tank. It has a Cork seal which is smothered in blue hylomar, also there is no paint round the bolt holes to stop petrol weeping under the paint.       

[clivegto]

[clivegto]

10mm thick nylon sheet turned up eventually. Cut a 50mm slice of it then started playing around with the heat gun and various quick shift jigs to bend it to shape.  Still a bit more work to be done but I recon it will work. If it doesn't I will just bolt some flat bits on top bottom.      

[Swirl]

Can you tell what it is yet 

[clivegto]

34 minutes ago, Swirl said:

Can you tell what it is yet 

Not yet bud, more heat gun action & beer   

[370steve]

got mine the other day, going to get it on the mill

[clivegto]

Well it's sort of close  

[clivegto]

16 minutes ago, 370steve said:

got mine the other day, going to get it on the mill

Might do it like my other Harris but with the nylon Steve.