yann7/11r Posted July 18, 2019 Author Posted July 18, 2019 I must admet, i feeled satisfied with the bike, in term of road feeling. Taking experience from this one...Why not, start another build, but for trackdays, this time. Taking exactly same parts and setup, but I'd in mind something much lighter in race trim version. I'll do this with some parts i'd in stock since few month. Bike will be mounted from ground...another time. So...2 years ago, story began a little bit like that : - Once upon a time...A Slabby carbon fuel tank was all alone... 3 Quote
yann7/11r Posted July 19, 2019 Author Posted July 19, 2019 ...and then carbon tank maried a frame. A 1986 GU74C . Slabby swingarm is modified to follow the exact pattern as this one i made earlier, for first one bike(see thread pics higher) and i've a Marchesini rear wheel to fit. 6 Quote
yann7/11r Posted July 20, 2019 Author Posted July 20, 2019 After first year or so... During all the reassembling process i keeped my target in mind. Many moment i totally missed the mark. So i disassembled all the bike...changed some components. After some errors and search this is a result... Engine is a GsxF11. So no chance he does work righly with RS40 carbs installed on... Finaly find a Marchesini pair. The only one rear i'd at the begining is going on my MotoMartin. Rear shock is a fresh Öhlins instead the old one i'd thinking refurbishing. 43mm fork from GsxR 750 J. What to say from the Limited seat !!! Thanks Jason @fiberman! Stainless exhaust from MIG (another time ). 8 Quote
markfoggy Posted July 20, 2019 Posted July 20, 2019 You like a comfy seat. Jan, that looks very cool. Quote
yann7/11r Posted July 20, 2019 Author Posted July 20, 2019 3 hours ago, markfoggy said: You like a comfy seat. Jan, that looks very cool. Thanks Mark ! I must admet, i prefer a comfy seat for my old butt ! Jason has done a great conception work with this one. Rider seat much higher than stock. This give a modern install on bike. GsxR 750 J fork is mounted with Harris yokes. This pair was bored from 41 to 43mm. Combined with short fork tube this gave me the wanted bike rake. Quote
yann7/11r Posted July 23, 2019 Author Posted July 23, 2019 To dress the tail with a rear light, my idea was to duplicate the SERT kind. I purchased two tiny "VIGNAL" like original model. So this time too, all was "laser cutted" with only a driller and a saw. Plates are in clear "styroglass" coming from local supermarket... Result: 6 Quote
yann7/11r Posted July 25, 2019 Author Posted July 25, 2019 No much money , so...not so much choice if i want make significative progress. So i take oil cooler, coils and rearset from my GsxR1100 H (need some clutch works...), to mount all the stuff on this one. Exhaust silencer is absolutely not supposed stay as it is... I mounted some CV36 carbs. Engine is alive. I was able to make first wheels turn. 4 Quote
yann7/11r Posted July 28, 2019 Author Posted July 28, 2019 One more step with a Beringer brakes front master cylinder . And as planified, modified routing exhaust in a better shape. I'm not satisfied with the top fairing . Looking for something different. Slingshot or...Tornado look maybe... I've find some new airfilter too. This is the state for this week. To be continued... 2 Quote
slabbyfaceddean Posted July 29, 2019 Posted July 29, 2019 On 7/10/2019 at 8:40 AM, yann7/11r said: @Gammaboy This one is 92-93 (sc29) but i think you can take a 95 with no trouble. Yes thank you, got one in the workshop for welding Quote
slabbyfaceddean Posted July 29, 2019 Posted July 29, 2019 On 7/10/2019 at 8:40 AM, yann7/11r said: @Gammaboy This one is 92-93 (sc29) but i think you can take a 95 with no trouble. Yes thank you, got one in the workshop for welding 1 Quote
slabbyfaceddean Posted July 29, 2019 Posted July 29, 2019 He's to good as always, lovely fit for purpose looking bikes. 1 Quote
yann7/11r Posted October 25, 2020 Author Posted October 25, 2020 (edited) Last evo. Edited October 25, 2020 by yann7/11r Wrong pic Quote
manden Posted October 28, 2020 Posted October 28, 2020 from where did you get the tank? how much fuel does it hold? and what did you have to pay? Quote
yann7/11r Posted October 28, 2020 Author Posted October 28, 2020 1 minute ago, manden said: from where did you get the tank? how much fuel does it hold? and what did you have to pay? 1-Carbon fiber fuel tank build by "Composite Motos" in France. 2-18liters capacity 3-Cost me approx. 600€ five years ago 1 Quote
Captain Chaos Posted October 28, 2020 Posted October 28, 2020 26 minutes ago, manden said: from where did you get the tank? I can answer that. From a village called Luc sur mer 2 Quote
Captain Chaos Posted October 28, 2020 Posted October 28, 2020 1 minute ago, yann7/11r said: Souvenirs @Captain Chaos Yes you once wrote that you bought it in a place very close to where i grew up. Shit like that i can remember, but not my wifes birthday for example 4 Quote
Kamikaze Posted November 1, 2020 Posted November 1, 2020 Luv this bike Yann, looking forward to more progress..... i need to pull my finger out and finish my 7UP bike. I'm still waiting for parts..... 1 Quote
yann7/11r Posted November 1, 2020 Author Posted November 1, 2020 12 minutes ago, Kamikaze said: Luv this bike Yann, looking forward to more progress..... i need to pull my finger out and finish my 7UP bike. I'm still waiting for parts..... I was thinking your 7up finished . Have a nice day, Paul. Quote
Kamikaze Posted November 4, 2020 Posted November 4, 2020 On 11/1/2020 at 9:29 AM, yann7/11r said: I was thinking your 7up finished . Have a nice day, Paul. no, still waiting on some bearings and bolts to fit the hubs on the australites..... 1 Quote
yann7/11r Posted December 27, 2021 Author Posted December 27, 2021 Some months passed during this sh.t year and plan has gently changed in term of fairing. Got opportunity to buy a bargain (never mounted) Ragged Yoshimura 86 fairing from a friend. YES...you can find some British made stuff...in France ! Think it's look much what i want instead the vintage Roca one. Racefit exhaust goes away toi as i prefer a long pipe to suit the Fiberman seat and my Remus one is just . 15 Quote
yann7/11r Posted March 14, 2022 Author Posted March 14, 2022 Made some change on my first slabby. Marchesini rear wheel and...a complet brake system from Beringer. 12 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.